Ice/Water Dispenser
^Turn on the Ice/Water dispenser with a finger touch to the control panel or by passing your hand under the dispenser to activate it via the light sensor.
All of the touch controls for the Ice/Water Dispenser should now appear white.
If this is not the case, the Safety Lock is activated i.e. "lock" will appear yellow. See "Safety Lock".
If "lock" is blinking, the drip tray needs to be emptied (see "Cleaning and care")!
Dispensing water
^Place a suitable cup on the drip tray.
^Press and hold the "water" button.
As long as you hold in the "water" button, water will flow from the dispenser.
The water from the dispenser is cooled to a palatable temperature. If you would like the water colder, place ice cubes in the glass before dispensing water.
Dispensing (crushed) ice
^Place a suitable cup on the drip tray.
^Press and hold the "cubes" or "crushed" button.
As long as you hold in the desired button, ice will fall from the dispenser.
Release the button when the jar is almost full. Ice in the discharge may cause the cup to overflow or block the discharge.
The ice cube maker can produce approx. 150 ice cubes within 24 hours.
22