Frequently asked questions
Problems with the ice/water dispenser
Issue | Possible fault | Solution | |||
|
|
| |||
The ice maker will not | The appliance is not | Check that the appliance is | |||
switch on. | plugged in. | connected to the power | |||
|
|
| supply. | ||
|
|
| |||
The ice maker is not | When the appliance is turned on for the very first time, it | ||||
producing any ice. | can take up to 10 hours for the first ice cubes to drop | ||||
| out of the ice cube maker and collect in the container. | ||||
|
|
| |||
| The appliance is not turned | Check that the appliance is | |||
| on. | switched on. | |||
|
|
| |||
| The water supply line was | Contact Miele. | |||
| not primed (purged of air) |
|
|
| |
| before the appliance was |
|
|
| |
| used for the first time. |
|
|
| |
|
|
| |||
| Check if: | See "Ice/Water Dispenser" | |||
| – | the Ice/Water dispenser | and/or "Plumbing" for more | ||
|
| is switched on. | information. | ||
| – | the water supply line is |
|
|
|
|
| open. |
|
|
|
| – | there are ice cubes |
|
|
|
|
| stuck together and |
|
|
|
|
| blocking the exit. |
|
|
|
| – | the ice cube container is |
|
|
|
|
| in the right position. |
|
|
|
| – | the freezer compartment |
|
|
|
|
| temperature is too high. |
|
|
|
| – | the water pressure is too |
|
|
|
|
| low. The water pressure |
|
|
|
|
| must be between 25 and |
|
|
|
|
| 120 psi |
|
|
|
|
|
| |||
| Check whether the correct | ||||
| water valve has been | 3/ | 16 | " (4.76 mm) saddle | |
|
|
|
|
| |
| installed. | valves reduce the water | |||
|
|
| pressure and can block the | ||
|
|
| pipe. | ||
|
|
|
|
|
|
45