Mitel UC360 manual Media, Registration Time Out, Proxy Server Address, Keep Alive Interval

Page 62

UC360 Administration and User Guide

Media

Under Media, set the following parameters:

Audio CODEC List — specify the preferred order for audio CODEC usage. Refer to the section on CODECs and bandwidth in the UC360 Engineering Guidelines for more information.

-If G.729a has been enabled, and you then enable and disable H.264, the G729a setting is still preserved even though it does not display in the Audio codec list.

Video CODEC List — specify the preferred order for video CODEC usage.

-The UC360 must be reset if the H.264 video codec is not enabled, and has been enabled for the first time.

-G.729 is disabled and not available from the System Settings -> SIP Settings -> Audio codec list menu for the Remote Collaboration/Video Appliance variant of the UC360. This ensures the best audio quality.

-If G729 is required, an administrator can enable it manually.

Packet Time — set the preferred packet time from 20 ms to 100 ms in 10 ms increments. A packet time of 20 ms is recommended. Note: Certain CODECS may only operate in 20 ms increments.

DTMF Mode — the UC360 sends DTMF signaling both in-band and out of band.

DTMF Payload — set the In-Band payload number to a value between 96 and 127. 101 is the default value. It is recommended to leave this at the default value. For third party SIP severs, consult the vendor’s documentation as to how to set the DTMF Payload value.

Registration Time Out

This is the SIP registration time out value in seconds. It is recommended to leave this at the factory default setting of 3600 seconds.

Proxy Server Address

This is the SIP Proxy server IP address (IPv4).

Keep Alive Interval

This is the SIP keep-alive interval in seconds. It is recommended to leave this at the factory default setting of 0, which is disabled.

If the UC360 is used as a Telewoker set, then input the Keep Alive Interval required by MBG.

56

Image 62
Contents UC360 Collaboration Point Trademarks Introduction Contacts App UC360 Configuration External Keyboard Supported Keys Chapter UC360 Administration and User Guide Introduction UC360 Product Variants UC360 Collaboration Point Audio and In-Room PresentationAbout This Document Related DocumentationUC360 Administration and User Guide About the UC360 UC360 Administration and User Guide About the UC360 Main Screen Conference App Function KeysMenu Bar Share AppUsing Gestures Status BarUnmounting Media Using Clean ModeCustomizing the UC360 Using the Keyboard Conference APP UC360 Administration and User Guide Emergency Calls To make an Emergency CallMaking a Conference Call To make an audio or video conference callMaking a Consultation Call To make a consultation callSaucer Icon Answering an Incoming Call About Incoming Calls To retrieve the held call Placing a Conference Call on HoldTo put an individual caller on hold To put the entire conference on holdPlacing a Consultation Call on Hold To put a consultation caller on holdTo mute a call Switching Between CallsMuting a Conference Call To unmute a callTo end the entire conference call Ending a Conference CallEnding a Consultation Call To end a call with a single participantCleaning Up after a Conference Call Video Calls Additional Information You May Need to KnowAudio Calls Conference Call Avatar UC360 Administration and User Guide Contacts APP UC360 Administration and User Guide About Contacts Finding ContactsCalling a Contact Once you tap a contact name, the following screen pops upSearching for a Contact Using the Dial Pad Desktop Apps UC360 Administration and User Guide About Displaying and Sharing Presentations Launching Shared or Non-Shared ApplicationsTo display your presentation To adjust the cameraSharing Presentations Tips on Presentation Sharing and Video Task PressUsing Remote RDP Setting Up Your Computer to Use Remote DesktopLaunching Your RDP Session Pre-Saved Remote Computer Using SmartOffice Launching SmartOfficeAccessing Help on SmartOffice Basic Rules on How Presentation Sharing Works UC360 Administration and User Guide UC360 Configuration UC360 Administration and User Guide Launching Settings Advanced Settings UC360 Configuration Configure System Settings Prerequisites SIP SettingsAuthentication AccountProxy Server Address MediaRegistration Time Out Keep Alive IntervalNetwork Settings Enable/Disable Use Pictures LDAP/AD SettingsLdap Server Settings Enable/Disable Connect to MBGLdap Search Directory Ldap Translations Plan Writing rulesSchedule updates Ldap Server UpdatesGet updates now Dial plan notes Dial PlanWriting rules UC360 Configuration RDP Settings History Advanced Settings Password Camera Settings Ethernet Camera FirmwareCamera Security Perform Factory Restore on Axis CameraAdd the Username and Password to UC360 Camera Settings Create an Onvif User in AxisCountry Variant Backup Import/Export Unmount SD CardHttp Server Upgrade Upgrade System SoftwareSD Card Upgrade Http Server Upgrade via MAS/MBGDebug Settings RebootFactory Reset Screen Saver Language Support MCD Programming for the UC360 User and Device Configuration SIP Service Selection Access and Authentication Multiline Support SIP Device Capabilities SDP Options Signaling and Header Manipulation Timers Distinctive Ring TonesAppendix a UC360 Administration and User Guide External Keyboard Supported Keys Keys/Functionality Mitel Application Remote Desktop RDPUC360 Administration and User Guide Appendix B UC360 Administration and User Guide Using Piscel SmartOffice Editing User Interface BasicsUC360 Administration and User Guide
Related manuals
Manual 90 pages 26.71 Kb Manual 2 pages 26.07 Kb Manual 89 pages 59.71 Kb Manual 2 pages 23.15 Kb Manual 2 pages 48.55 Kb

UC360 specifications

The Mitel UC360 is an advanced collaboration platform designed to enhance communication and productivity in the modern workplace. This all-in-one solution meets the demands of organizations seeking to integrate various communication channels, such as voice, video, and messaging, into a single user-friendly device.

One of the standout features of the Mitel UC360 is its high-definition audio and video capabilities. With a built-in HD camera and advanced audio processing technology, it provides crystal-clear video conferencing experiences. This ensures that users can connect with remote team members, clients, or partners seamlessly, fostering collaboration regardless of location.

The UC360 also supports a range of connectivity options. It features Wi-Fi, Bluetooth, and Ethernet connections, making it adaptable to various network environments. This versatility allows organizations to deploy the device in different settings, whether in huddle rooms, executive offices, or shared spaces, without worrying about connectivity issues.

Additionally, the Mitel UC360 is equipped with a user-friendly touch interface that simplifies navigation. Users can easily initiate video calls, share documents, and manage meetings through intuitive controls. The interface is designed to be accessible for all team members, reducing the learning curve and ensuring that everyone can leverage its powerful features quickly.

Integration with collaboration tools is another significant characteristic of the UC360. It can seamlessly connect with popular applications and platforms, including Microsoft Teams and Skype for Business. This compatibility allows users to engage in video conferences directly from their preferred collaboration tool, streamlining workflows and enhancing productivity.

Security is also a priority for the Mitel UC360. The device offers robust security features to safeguard communications, ensuring that sensitive information is protected during calls and meetings. This focus on security gives organizations the peace of mind they need when conducting business communications.

In conclusion, the Mitel UC360 is a comprehensive solution for organizations looking to enhance their communication capabilities. With its high-definition audio and video quality, versatile connectivity options, user-friendly interface, and robust security features, it stands out as a powerful tool for fostering collaboration in today’s dynamic work environments. As businesses continue to adapt to changing communication needs, the UC360 positions itself as a valuable asset in facilitating effective teamwork and interaction.