Everpure 80, SID650A manual Safety Precautions, Important Installation Notice

Page 5

SAFETY PRECAUTIONS

Always disconnect power to the dispenser before servicing or cleaning.

Never place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator rotation occurs automatically when the dispenser is energized!

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates contamination of ice. To insure continued protection and sanitation, observe the following

ALWAYS be sure the removable lid is properly installed to prevent unautho- rized access to the hopper interior and possible contamination of ice.

ALWAYS be sure the upper and lower front panels are securely fastened.

ALWAYS keep area around the dispenser clean of ice cubes.

IMPORTANT INSTALLATION NOTICE

An Everpure System CSA, part number 9329-43, or equal, icemaker quality water treatment unit MUST BE INSTALLED in the water supply line to the icemaker. Failure to do so may result in poor quality ice, low produc- tion output and may cause premature failure of icemaker evaporator and void the extended evaporator warranty.

This icemaker is provided with a stainless steel evaporator, designed to last the life of the product. However, some of the chemicals in treated and untreated water, specifically chlorine and sulfur (sulfide), have the ability to attack stainless steel and cause premature failure. An initial investment in proper water treatment will pay for itself in increased production, quality and long life of the product.

1

90846

Image 5
Contents From kent M O R a N D U MSpiral ICEMAKER-DISPENSER Table of Contents Table of Contents cont’d Important Installation Notice Safety PrecautionsUnpacking DescriptionPlumbing InstallationLocation Beverage System InstallationMounting Template Model SID650--80 15 7/8 29/32 29 1/4 18 3/416 1/4 28 3/4 14 7/8 15 3/4 17 5/8 29 1/4 34 3/8 34 7/8 16 5/811 1/8 13/16Models Post MIX Beverage Syustem Schematic BC Models Post MIX Beverage System Schematic Icemaker Start UPIcemaker Operating Instructions Cam Time Switch ActionOperating Instructions Wiring Schematic 115 / 1 / 60 HZ Wiring Diagram Refrigeration Schematic Cleaning Instructions MaintenanceDispenser Section For Units with Beverage SystemBeverage System Thermostat Altitude Adjustments MAINTENANCE/ADJUSTMENT ProcedureICE Thickness Adjustment Clearing Evaporator FREEZE-UPHarvest Timer Adjustment Cleaning / Replacing the FilterCleaning the Condenser AIR-COOLED Unit Manual Filling Detail of CAM Wheel # T1 Troubleshooting Guide 90846 90846 RUN? GO to Is ICE Production Icemaker Inoperative YES RUN RUN/STOP Check Voltage Problems No ICE on Evaporator Harvest YES ±10%? CON’T Check Refrigeration System 90846 Dispenser Problem YES Does Agitator ROTATE? 90846 Refrigeration Components Parts ListElectrical Controls Miscellaneous Components Description Refrigeration Components cont’dEvaporator Components Warranty IMI Cornelius INC