Miele DA 3490 Automatically switching back the intensive power level, Automatic Safety Shut-Off

Operation

Automatically switching back the intensive power level

The intensive level can be programmed to automatically switch back to level 3 after 10 minutes.

￿To set this option, the fan and the overhead lighting must be turned off and the fume deflector pushed in.

￿Press and hold the "–" and "+" buttons for approx. 10 seconds until power level indicator 1 lights up.

￿Then press the following buttons one after another :

–overhead lighting ￿,

–the "–" button, and

–overhead lighting ￿ again,

If the indicators 1 and IS flash, the automatic switch back is not activated.

￿To activate the automatic switch back, press the "+" button.

The power level indicators 1 and IS light continuously.

To deactivate, press the "–" button.

￿Press the On/Off button ￿ to confirm.

￿If the procedure is not stored within 4 minutes, the hood will automatically default to the "old" data.

Automatic Safety Shut-Off

If the ventilation system is left on, the fan will turn automatically off 10 hours after the last button was activated. The lighting however will remain on.

￿Press the On/Off button ￿ to turn the fan back on again.

11