Installation |
|
2. Runners | 3. Installing the hood in the |
| cabinet |
| Lay the hood on its back side. |
| Do not remove the installation |
| protector between the deflector and |
| casing before the installation is |
| completed. |
The runners are made for side walls of 5/8" (16 mm) and 3/4" (19 mm). Screw on the angled side which has the imprint of the respective cabinet wall measure.
Align the runners with the drawn line
and be sure that they are flush with the lower edge of the cabinet side wall. Screw the runners on the left and right side in the cabinet.
Hold the grease filter and pull it out along with the deflector.
28