Miele DA 3490, DA 3460, DA 3480 Install the grease filter, Weight of the front panel

Page 32

Installation

Weight of the front panel

6. Install the grease filter

The weight of the front panel must not exceed 2.8 lbs (1.3 kg). This applies for front panels with a depth of up to 1 1/4" (30 mm). In the case of front panels of greater depth or greater weight, the weight must be reduced by milling out the back of the panel, for instance.

￿The deflector can be adjusted up to 1 3/8" (35 mm) towards the front with the two adjusting screws left and right in the deflector. Adjust the deflector until it is flush with the front of the adjacent cabinetry.

￿Remove the protective film from the grease filter frame.

￿To reinsert the grease filter, pull the deflector out.

￿Make sure that the red plastic guides are at the front and facing up.

￿Insert the grease filter into the deflector, and push upwards. It should glide onto the fixing pins.

32

Image 32
Contents Operating and Installation Instructions Ventilation System Contents Important Safety Instructions Use To Reduce the Risk of a Cooktop Grease FireEvacuate and Call the Fire Department Installation Air extraction Recirculation modeFunctional description Guide to the Ventilation System Four fan speed selection Optional accessory for recirculation ModeFacia Panel Operation Automatically switching back the intensive power level Automatic Safety Shut-OffCleaning and care Cleaning the casingStainless steel surfaces Stainless steel colored controlsCleaning the filter Inserting / replacing the active charcoal filters Changing the light bulbs MieleCare After Sales ServiceRepairs Installation Instructions Page Disposal of an old appliance Caring for the environmentDisposal of packing material Appliance dimensions Hood can also be installed in a 23 5/8 60 cm cabinet Appliance dimensions Distance between cooktop and hood S Miele Cooktops Non-MieleInstallation Installation accessoriesInstallation kit DML 400 to install a custom panel RunnersSpacer strip Screws 4 x 15 mmInstallation Installing the space bar = K cabinet depth minus G hood DepthRunners Installing the hood Cabinet Installation Secure the appliance Install the front panel if necessary Install the grease filter Weight of the front panelAir extraction mode Recirculation modeVenting Electrical connectionAir extraction Condensate trap Electrical connection Grounding InstructionsTechnical Data Page Page Alteration rights reserved Nr 190 990
Related manuals
Manual 1 pages 56.63 Kb