|
| Installation |
1. Installing the space bar |
| |
T = K cabinet depth minus G hood |
| |
depth |
| |
The hood depth G depends on the |
| |
| custom panel: |
|
– | Hood installed without front panel |
|
– | Hood installed with a cabinet |
|
| matching custom panel | Screw the space bar flush with the |
These measures are only valid for the | wall under the cabinet side walls. | |
| ||
installation if the front panel sits flush |
| |
with the cabinet corpus (without the |
| |
door). |
| |
If the front panel should be installed recessed or flush with the cabinet door, adjust the measure T accordingly.
Cut the supplied space bar to measure T.
Clip it with a knife at the predeter- | At the front edge of the spacer strip |
mined breaking point of the next | draw a vertical line on left and right |
lower measure. | side of the inside cabinet. |
27