Miele DA 3460, DA 3480 Venting, Electrical connection, Air extraction mode, Recirculation mode

Page 33

 

Installation

7. Venting

 

Air extraction mode

 

￿ Complete the venting installation, see

 

"Air extraction".

 

Recirculation mode

 

If the hood cannot be installed for air

 

extraction the appliance must be

 

connected for recirculation mode.

 

For recirculation mode a respective

 

installation kit is recommended which

 

can be obtained from Miele.

 

In addition an active charcoal filter is

 

needed.

 

 

￿ Install the installation kit as described

 

in the manual supplied with the kit.

￿ The non-return flap is not needed for

￿ Make sure that the slats in the grill

the recirculation mode. Pull the

point towards the center of the room

non-return flap off the bracket from

and not towards a wall or the ceiling.

the vent connection.

 

 

￿ Install the Active Charcoal Filter (see

 

"Cleaning and care").

8. Electrical connection

Refer to the notes in "Electrical connection" and "Important Safety Instructions" before connecting to the mains.

￿ Plug in the power cord.

33

Image 33
Contents Operating and Installation Instructions Ventilation System Contents Important Safety Instructions To Reduce the Risk of a Cooktop Grease Fire UseEvacuate and Call the Fire Department Installation Recirculation mode Functional descriptionAir extraction Guide to the Ventilation System Optional accessory for recirculation Mode Facia PanelFour fan speed selection Operation Automatic Safety Shut-Off Automatically switching back the intensive power levelCleaning the casing Cleaning and careStainless steel surfaces Stainless steel colored controlsCleaning the filter Inserting / replacing the active charcoal filters Changing the light bulbs After Sales Service RepairsMieleCare Installation Instructions Page Caring for the environment Disposal of packing materialDisposal of an old appliance Appliance dimensions Hood can also be installed in a 23 5/8 60 cm cabinet Appliance dimensions Miele Cooktops Non-Miele Distance between cooktop and hood SInstallation accessories InstallationRunners Installation kit DML 400 to install a custom panelSpacer strip Screws 4 x 15 mmInstallation = K cabinet depth minus G hood Depth Installing the space barRunners Installing the hood Cabinet Installation Secure the appliance Install the front panel if necessary Weight of the front panel Install the grease filterRecirculation mode Air extraction modeVenting Electrical connectionAir extraction Condensate trap Grounding Instructions Electrical connectionTechnical Data Page Page Alteration rights reserved Nr 190 990
Related manuals
Manual 1 pages 56.63 Kb