Garmin 210 GEO T DL user manual To Replace a Grill Controller, To Remove an Oven Cut-Off Thermostat

Page 29

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

6.To Replace a Grill Controller

Disconnect the appliance from the electricity supply.

a)Remove the hotplate as detailed in Section 1.

b)Remove the control panel as detailed in Section 2.

c)Disconnect the controller wiring. Undo the fixings that secure the device to the mounting plate.

d)Fit the replacement and re-assemble parts in reverse order. Check that the replacement functions correctly.

7.To Remove an Oven Cut-Off Thermostat

Disconnect the appliance from the electricity supply.

a)Pull the unit forward to gain access to the cover box. Undo the cover screws and lift clear.

b)The control is located on the earth plate beside the oven element connections.

c)Disconnect the thermostat wiring. Undo the fixings that secure the thermostat to the earth plate and remove.

d)Fit replacement control and re-assemble parts in reverse order.

e)Fit the replacement electrode to the burner bezel. Ensure that the spring and clip are properly located.

f)Replace in reverse order and check correct burner ignition.

12.To Remove a Hotplate Burner

a)Remove the pan supports, hotplate accessories and burner heads.

b)Remove the hotplate as detailed in Section 1.

c)Undo the compression fitting which connects the burner body to the gas pipe.

d)Remove the nut that secures the burner body to the support channel.

e)Remove the fixings that secure the support channel to the chassis. Lift the channel clear of the appliance.

f)Remove the burner body from the appliance.

g)Replace in reverse order. Check the appliance is gas sound and that the burner operates satisfactorily.

8.To Remove a Hotplate Tap

a)Remove the hotplate as detailed in Section 1.

b)Remove the control panel as detailed in Section 2.

c)Unplug the FSD lead from the rear of the tap. Undo compression fitting at the rear of the tap. Remove the fixings that secure the tap to the gas rail. Disconnect the ignition switch wiring.

d)Remove the tap. Remove and discard the gasket seal. Fit new gasket seal to replacement tap.

e)Re-assemble in reverse order. Check the appliance is gas sound. Check hotplate ignition.

9.To Change an Ignition Switch

Change the gas tap as detailed in Section 8.

10.To Remove a Hotplate Burner Injector

a)Remove the hotplate as detailed in Section 1.

b)Remove the injector directly from the burner body.

c)Fit the appropriate injector.

d)Re-assemble in reverse order. Check the appliance is gas sound.

11.To Remove a Hotplate Burner Spark Electrode

a)Remove the pan supports, hotplate accessories and burner heads.

b)Undo the bezel venturi and remove the bezel from the hotplate. The spark ignition wire will be pulled through the electrode clearance hole.

c)Disconnect the spark electrode from the ignition wire.

Note: Take care to prevent the ignition wire from falling back through the clearance hole.

d)Undo the spark electrode from the bezel by removing the spring clip and spring.

13.To Remove the Oven Door

a)Open the oven door.

b)Support the door and remove the two screws which secure the upper hinge to the front frame of the unit.

c)Remove the door from the lower hinge by lifting slightly and moving it outward.

d)Re-assemble in reverse order.

14.To Remove the Grill Door

a)Remove the pan supports, hotplate accessories and burner heads.

b)Remove the hotplate as detailed in Section 1.

c)Remove the control panel as detailed in Section 2

d)Remove LH side panel a detailed in Section 3.

e)Remove the plinth (3 screws).

f)Remove the central vertical cover situated between the ovens. (5 screws).

g)Remove the 2 countersunk screws (1 per side) which secure the hinge arms to the front of the grill chamber.

Note: The door hinge arms are spring tensioned. Carefully remove the grill door and retain the gaskets.

h)Re-assemble in reverse order. Ensure that the gasket is fitted between the hinge arm and the front of the grill chamber. Check door operation.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents User’s Manual Installation and Servicing InstructionsBe safe InstallationGas and Electricity on Peculiar smellsContents Hotplate Burners Wok Cooking Wok Centre RingGlide Out Grill Using the GrillTime minutes Grill Cooking ChartRight Hand Tall Oven OvensLeft Hand Oven Multi-function oven functions Base heat Browning elementBoth Ovens SteamTall oven shelves Main Oven shelvesFalcon Multi-function Oven cooking guide Cooking chart Fan assisted oven functionEnsure meat and poultry is fully cooked before serving Oven Shelf Food Temp Position Approximate Cooking TimePosition Oven Cooking chart Conventional and full Fan oven functionsApproximate Cooking Time Stainless Steel Hob Cleaning your cookerHotplate burners Glide-OutGrillMain Oven Cleaning Brass ComponentsControl Panel and Oven Doors Tall Oven Moving your cookerTroubleshooting 0800 111 General Safety InstructionsIf you smell gas Take care that no water seeps into the appliance Dear Installer InstallationProvision of Ventilation Location of CookerYou will also need the following tools Positioning the CookerThese are not supplied by with the cooker Moving the Cooker Unpacking the CookerGas Connection Conversion to LPLevelling Electrical Connection Main Door adjustmentHotplate GrillServicing warning Conversion to LP GasInjectors To convert the control tapsNatural Gas at 20mbar ReassemblyLP Gas Butane at 28-30 or Propane at 37mbar Burner ringsStick on label Pressure TestingOuter Burners Check the appliance is gas soundServicing To Replace a Grill Controller To Change an Ignition SwitchTo Remove an Oven Cut-Off Thermostat To Remove a Hotplate BurnerTo Remove the Door Latch To Remove the Oven Outer Door PanelTo Remove the Oven Door Seal To Remove the Hotplate Spark GeneratorTo Remove an Oven fan Element To Adjust the Main Oven Door AngleTo Remove the LH Oven Bottom and Top Elements To Remove a Grill ElementKey Circuit DiagramDimensions Technical DataRatings ElectricPage Page ArtNo.000-0001 Aga address block

210 GEO T DL specifications

The Garmin 210 GEO T DL is an advanced GPS device designed for outdoor enthusiasts, allowing users to navigate with precision and ease. It combines topographical mapping, sophisticated navigation features, and rugged durability, making it a favorite among hikers, campers, and adventurers.

One of the standout features of the Garmin 210 GEO T DL is its high-sensitivity GPS receiver. This technology ensures accurate tracking even in challenging environments, such as dense forests or mountainous terrains, where signal loss can often be an issue. The device quickly locks onto satellites, providing real-time location data and ensuring that users can follow their routes confidently.

The screen of the 210 GEO T DL is notably user-friendly, featuring a high-resolution display that is easy to read even in bright sunlight. This is particularly beneficial for outdoor use, where visibility can be a challenge. Users can view detailed maps, waypoints, and track information, making the navigation process intuitive and straightforward.

Another important aspect of the Garmin 210 GEO T DL is its extensive mapping capabilities. The device comes preloaded with topographic maps, enabling users to explore diverse terrains without the fear of getting lost. The mapping system also supports the addition of custom maps, allowing users to personalize their navigation experience based on their specific needs and interests.

Battery life is crucial for outdoor equipment, and the Garmin 210 GEO T DL excels in this area. It boasts a robust battery performance, allowing for hours of continuous use. This is essential for long hikes or camping trips, where access to power sources may be limited.

Additionally, this GPS device includes features such as waypoint marking and route planning. Users can easily save locations of interest, such as campsites or scenic overlooks, and navigate back to them later. The built-in compass and barometric altimeter further enhance the outdoor experience, providing users with real-time information on their elevation and direction.

Overall, the Garmin 210 GEO T DL is a reliable and feature-rich GPS device tailored for those who appreciate the great outdoors. Its combination of advanced navigation tools, robust mapping capabilities, and durable design makes it an essential companion for any adventure, ensuring that users can explore with confidence and safety.
Top Page Image Contents