Garmin 210 GEO T DL user manual To Remove the Oven Outer Door Panel, To Remove the Door Latch

Page 30

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

15. To Remove the Oven Outer Door Panel

18. To Adjust the Oven Door Catch Keeper

a)Open the oven door.

b)Remove two screws ‘A’ and two screws ‘B’ from the door.

c)Remove the outer door panel.

d)Undo the nuts that secure the handle to the door panel. Fit the handle to the replacement door panel.

e)Fit the replacement panel to the oven inner door making sure that the door insulation is correctly located.

f)Re-assemble in reverse order.

16.To Remove the Door Latch

a)Remove the oven outer door panel as detailed in Section 15.

b)Remove the fixings that secure the latch assembly to the inner door panel.

c)Fit the replacement catch and re-assemble in reverse order.

d)Check correct operation of door.

17.To Remove the Oven Door Seal

a)Open oven door. The seal is held in place by small hooks on the rear face. At the corner pull seal diagonally away from the door centre until that hook is released.

b)Proceed to the next hook and release it in a similar way, and so on. Use force if the hooks are stiff, as the old seal will be discarded.

c)When fitting new seal, position the seal join at the bottom. Hook the new seal in one of the corner holes of the door, and proceed round the door snapping in each hook in turn.

a)Open the oven door and slacken the locknut at the keeper base.

b)Adjust the keeper inward or outward as required, until the desired door operation is obtained.

c)Re-tighten the locknut.

19.To Remove the Hotplate Spark Generator

Disconnect the appliance from the electricity supply.

a)Pull the unit forward to access the cover boxes at the appliance rear. Remove the fixings that secure the cover and lift it clear.

b)Undo the terminal connections noting their positions.

c)Undo the fixings that secure the spark generator and remove the device.

20.To Remove the Hotplate Electrode Leads

Disconnect from the electricity supply.

Pull the unit forward to access the rear of the appliance.

a)Remove the pan supports, hotplate accessories and burner heads.

b)Remove the hotplate as detailed in Section 1.

c)Remove the cover box and disconnect all HT leads at the generator.

d)Remove the lower back panel and disconnect the lead at the electrode.

e)Pull the sleeved bundle of HT leads up through the rear upright.

f)Pull the appropriate lead from the sleeve and push in the replacement.

g)Replace the leads in the rear upright.

h)Re-connect the leads at the generator and oven electrode.

j)Re-assemble in reverse order and check ignition.

21.To Remove Oven Inner Back

a)Open the oven door. For the LH oven unscrew the 2 thermostat phial fixing screws. Remove the fixings that secure the inner back to the oven rear.

b)Lift the removable panel away.

c)Re-assemble in reverse order. Ensure that the retaining fixings are fully tightened.

22.To Replace an Oven Fan

Disconnect the appliance from the electricity supply.

a)Pull the unit forward to access the cover boxes at the rear of the appliance. Remove the fixings that secure the cover and lift it clear.

b)Remove the fan wiring, noting the connection positions.

c)Remove the inner back as detailed in Section 21.

d)Hold the fan blades and undo the centre nut (LH thread), brass washers, fan blade and circlip.

e)Undo the fixings that retain the fan and remove it from the cavity rear.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Installation and Servicing Instructions User’s ManualGas and Electricity on InstallationBe safe Peculiar smellsContents Hotplate Burners Wok Centre Ring Wok CookingUsing the Grill Glide Out GrillGrill Cooking Chart Time minutesOvens Left Hand OvenRight Hand Tall Oven Multi-function oven functions Both Ovens Browning elementBase heat SteamMain Oven shelves Tall oven shelvesEnsure meat and poultry is fully cooked before serving Cooking chart Fan assisted oven functionFalcon Multi-function Oven cooking guide Oven Shelf Food Temp Position Approximate Cooking TimeOven Cooking chart Conventional and full Fan oven functions Approximate Cooking TimePosition Hotplate burners Cleaning your cookerStainless Steel Hob Glide-OutGrillCleaning Brass Components Control Panel and Oven DoorsMain Oven Moving your cooker Tall OvenTroubleshooting General Safety Instructions If you smell gas0800 111 Take care that no water seeps into the appliance Provision of Ventilation InstallationDear Installer Location of CookerPositioning the Cooker These are not supplied by with the cookerYou will also need the following tools Unpacking the Cooker Moving the CookerConversion to LP LevellingGas Connection Hotplate Main Door adjustmentElectrical Connection GrillInjectors Conversion to LP GasServicing warning To convert the control tapsLP Gas Butane at 28-30 or Propane at 37mbar ReassemblyNatural Gas at 20mbar Burner ringsOuter Burners Pressure TestingStick on label Check the appliance is gas soundServicing To Remove an Oven Cut-Off Thermostat To Change an Ignition SwitchTo Replace a Grill Controller To Remove a Hotplate BurnerTo Remove the Oven Door Seal To Remove the Oven Outer Door PanelTo Remove the Door Latch To Remove the Hotplate Spark GeneratorTo Remove the LH Oven Bottom and Top Elements To Adjust the Main Oven Door AngleTo Remove an Oven fan Element To Remove a Grill ElementCircuit Diagram KeyRatings Technical DataDimensions ElectricPage Page ArtNo.000-0001 Aga address block

210 GEO T DL specifications

The Garmin 210 GEO T DL is an advanced GPS device designed for outdoor enthusiasts, allowing users to navigate with precision and ease. It combines topographical mapping, sophisticated navigation features, and rugged durability, making it a favorite among hikers, campers, and adventurers.

One of the standout features of the Garmin 210 GEO T DL is its high-sensitivity GPS receiver. This technology ensures accurate tracking even in challenging environments, such as dense forests or mountainous terrains, where signal loss can often be an issue. The device quickly locks onto satellites, providing real-time location data and ensuring that users can follow their routes confidently.

The screen of the 210 GEO T DL is notably user-friendly, featuring a high-resolution display that is easy to read even in bright sunlight. This is particularly beneficial for outdoor use, where visibility can be a challenge. Users can view detailed maps, waypoints, and track information, making the navigation process intuitive and straightforward.

Another important aspect of the Garmin 210 GEO T DL is its extensive mapping capabilities. The device comes preloaded with topographic maps, enabling users to explore diverse terrains without the fear of getting lost. The mapping system also supports the addition of custom maps, allowing users to personalize their navigation experience based on their specific needs and interests.

Battery life is crucial for outdoor equipment, and the Garmin 210 GEO T DL excels in this area. It boasts a robust battery performance, allowing for hours of continuous use. This is essential for long hikes or camping trips, where access to power sources may be limited.

Additionally, this GPS device includes features such as waypoint marking and route planning. Users can easily save locations of interest, such as campsites or scenic overlooks, and navigate back to them later. The built-in compass and barometric altimeter further enhance the outdoor experience, providing users with real-time information on their elevation and direction.

Overall, the Garmin 210 GEO T DL is a reliable and feature-rich GPS device tailored for those who appreciate the great outdoors. Its combination of advanced navigation tools, robust mapping capabilities, and durable design makes it an essential companion for any adventure, ensuring that users can explore with confidence and safety.
Top Page Image Contents