Garmin 210 GEO T DL To Remove an Oven fan Element, To Remove the LH Oven Bottom and Top Elements

Page 31

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

f)Fit the replacement and re-assemble parts in reverse order. Check that the oven operates satisfactorily.

23.To Remove an Oven fan Element

Disconnect the appliance from the electricity supply.

a)Remove oven inner back (see 21).

b)Remove 2 screws from the top of the element and 1 from the bottom of the element in side the oven.

c)Lift element out carefully, disconnect the terminals connected to the element noting their positions. If it is not possible to disconnect the leads in this way, pull cooker forward to gain access to the rear, remove screws securing the electric cover to the back sheet and remove cover and disconnect the terminals from the rear.

d)Fit new element, and reassemble in reverse order.

e)Check that the oven operates correctly.

24.To Remove the LH Oven Bottom and Top Elements

Disconnect the appliance from the electricity supply.

Bottom Element

a)Pull the unit forward to access the cover boxes at the rear of the unit. Remove the fixings that secure the cover and lift it clear.

b)Undo the terminal connections, noting their positions.

c)Remove the fixings that secure the bottom element cover.

d)Undo the terminal connections, noting their positions.

e)Remove the lower element support fixings.

f)Remove the element bracket fixings and withdraw element.

g)Replace the element and re-assemble parts in reverse order.

Top Element

a)Open the LH oven door and undo the fixings that secure the heat shield.

b)Remove the top element bracket fixings and withdraw element.

c)Replace the element and re-assemble parts in reverse order. Check that the oven operates satisfactorily.

25.To Remove a Grill Element

Disconnect the appliance from the electricity supply.

a)Pull the grill carriage forward and lift the grill pan away from the carriage. Lift the grill carriage so that the front roller is free of the side arm. Slide the carriage forward on the rear roller until you can lift it away from the side arm.

b)From inside grill compartment remove enamelled front shield from grill roof, 2 screws and washers. Remove 2 screws and washers securing the grill element front support.

c)Remove the screws from the grill elements. Lift elements out carefully, disconnect the leads from the element terminals noting their position.

d)If it is not possible to disconnect the leads in this way, turn off the gas supply. Remove the drawer

– lower the front roller. Pull the cooker forward and disconnect the gas hose. Pull the cooker far enough forward to gain access to the rear.

e)Remove the fixings that secure the rear cover and lift it clear. Disconnect the terminals from the rear.

f)Fit new elements, reassemble in reverse order. Check operation of grill.

26.To Adjust the Main Oven Door Angle

a)The door bottom hinge can be adjusted to alter the angle of the door.

b)Loosen the bottom hinge fixing screws and use the notch and a flat bladed screwdriver to move the position of the hinge to set the hinge position.

c)Retighten the hinge screws.

Effect of hinge adjustment – exaggerated for clarity

Centre line of hinge pin

Oven door omitted for clarity

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents User’s Manual Installation and Servicing InstructionsPeculiar smells InstallationBe safe Gas and Electricity onContents Hotplate Burners Wok Cooking Wok Centre RingGlide Out Grill Using the GrillTime minutes Grill Cooking ChartLeft Hand Oven OvensRight Hand Tall Oven Multi-function oven functions Steam Browning elementBase heat Both OvensTall oven shelves Main Oven shelvesOven Shelf Food Temp Position Approximate Cooking Time Cooking chart Fan assisted oven functionFalcon Multi-function Oven cooking guide Ensure meat and poultry is fully cooked before servingApproximate Cooking Time Oven Cooking chart Conventional and full Fan oven functionsPosition Glide-OutGrill Cleaning your cookerStainless Steel Hob Hotplate burnersControl Panel and Oven Doors Cleaning Brass ComponentsMain Oven Tall Oven Moving your cookerTroubleshooting If you smell gas General Safety Instructions0800 111 Take care that no water seeps into the appliance Location of Cooker InstallationDear Installer Provision of VentilationThese are not supplied by with the cooker Positioning the CookerYou will also need the following tools Moving the Cooker Unpacking the CookerLevelling Conversion to LPGas Connection Grill Main Door adjustmentElectrical Connection HotplateTo convert the control taps Conversion to LP GasServicing warning InjectorsBurner rings ReassemblyNatural Gas at 20mbar LP Gas Butane at 28-30 or Propane at 37mbarCheck the appliance is gas sound Pressure TestingStick on label Outer BurnersServicing To Remove a Hotplate Burner To Change an Ignition SwitchTo Replace a Grill Controller To Remove an Oven Cut-Off ThermostatTo Remove the Hotplate Spark Generator To Remove the Oven Outer Door PanelTo Remove the Door Latch To Remove the Oven Door SealTo Remove a Grill Element To Adjust the Main Oven Door AngleTo Remove an Oven fan Element To Remove the LH Oven Bottom and Top ElementsKey Circuit DiagramElectric Technical DataDimensions RatingsPage Page ArtNo.000-0001 Aga address block

210 GEO T DL specifications

The Garmin 210 GEO T DL is an advanced GPS device designed for outdoor enthusiasts, allowing users to navigate with precision and ease. It combines topographical mapping, sophisticated navigation features, and rugged durability, making it a favorite among hikers, campers, and adventurers.

One of the standout features of the Garmin 210 GEO T DL is its high-sensitivity GPS receiver. This technology ensures accurate tracking even in challenging environments, such as dense forests or mountainous terrains, where signal loss can often be an issue. The device quickly locks onto satellites, providing real-time location data and ensuring that users can follow their routes confidently.

The screen of the 210 GEO T DL is notably user-friendly, featuring a high-resolution display that is easy to read even in bright sunlight. This is particularly beneficial for outdoor use, where visibility can be a challenge. Users can view detailed maps, waypoints, and track information, making the navigation process intuitive and straightforward.

Another important aspect of the Garmin 210 GEO T DL is its extensive mapping capabilities. The device comes preloaded with topographic maps, enabling users to explore diverse terrains without the fear of getting lost. The mapping system also supports the addition of custom maps, allowing users to personalize their navigation experience based on their specific needs and interests.

Battery life is crucial for outdoor equipment, and the Garmin 210 GEO T DL excels in this area. It boasts a robust battery performance, allowing for hours of continuous use. This is essential for long hikes or camping trips, where access to power sources may be limited.

Additionally, this GPS device includes features such as waypoint marking and route planning. Users can easily save locations of interest, such as campsites or scenic overlooks, and navigate back to them later. The built-in compass and barometric altimeter further enhance the outdoor experience, providing users with real-time information on their elevation and direction.

Overall, the Garmin 210 GEO T DL is a reliable and feature-rich GPS device tailored for those who appreciate the great outdoors. Its combination of advanced navigation tools, robust mapping capabilities, and durable design makes it an essential companion for any adventure, ensuring that users can explore with confidence and safety.
Top Page Image Contents