Installation
Installation accessories
4 Screws 8 x 60 mm with
4 Washers
(S10 wall anchors included in the packaging are not for use in USA / CDN)
2 spring clips to hang the hood onto the mounting plate
4 Flat head screws M 6 x 20 mm with nose and
4 M 6 locking nuts for securing the motor assembly
1 hose clip for securing the ducting
Installation instructions
See the enclosed installation instruction sheet.
Please read the "Important Safety Instructions" and Installation instructions before installing this hood.
Recirculation mode
If site conditions are not suitable for the hood to be used for air extraction, the appliance must be converted for recirculation.
For recirculation mode a conversion kit must be installed, available from Miele.
The conversion kit comes with an Installation manual.
After the hood is installed the charcoal filter must be inserted and the charcoal filter timer must be set. See "Cleaning and Care" and "Operation".
28