Cleaning and care
Before any cleaning or maintenance work, the extractor must be discon- nected from the mains supply (switch off at the wall socket and remove plug or the fuse).
Cleaning
The cooker hood housing may be cleaned using hot water to which a little mild detergent has been added.
Dry with a soft cloth.
Never use a cleaner which scours or contains chlorine, acids or soda. These would damage the surface of the cooker hood.
Grease filters
The grease filters can be cleaned in a dishwasher or by hand.
The grease filters should be cleaned regularly to ensure a trouble free oper- ation of the extractor fan, at least every 1 or 2 months, or when they are visibly saturated or no longer effective.
An
To remove the grease filters push the filter holder retainers towards the middle.
Take out the grease filters.
DA 272 i, DA 292 i only:
Press the clips at the side in using a blunt instrument and remove the re- tainers. Pull the filter cassettes and link pieces out for cleaning. Clean the edges of the frame by hand. The other parts can be cleaned in the dishwasher.
Clean the grease filters . . .
. . . by hand: with a scrubbing brush in hot water with detergent.
. . . in a dishwasher: place the fil- ters with the short side upright in the lower basket, ensuring the spray arm is not obstructed.
After cleaning, leave the filters to dry for a while on an absorbent surface before putting back in place.
10