Miele DA 272 I, DA 292 I, DA 262 I manual Air recirculation

Page 24

Air recirculation

If site conditions are not suitable for the cooker hood to be used for air extrac- tion, the appliance must be converted for recirculation.

The following parts are necessary for this, available from your Miele Dealer or from the Miele Spare Parts Department:

Conversion kit from extraction to re- circulation

(Ø 125 mm, 5")

Active charcoal filter

Connection

Place the hose with the directional grill on to the exhaust connection of the cooker hood.

Secure the hose on the exhaust con- nection using a hose clip.

Ensure that the air outlet from the di- rectional grill is pointed towards the kitchen interior.

It should on no account point to- wards a wall.

Screw the directional grill to the wall unit.

If there is a soffit, an appropriate cut-out in the soffit must be made.

Insert the active charcoal filter in the cooker hood (see chapter ”Cleaning and Care“).

24

Image 24

Contents Operating instructions Cooker hoods DA 262 DA 272 DA 292 Description of the appliance DA 262 DA 272 i / DA 292Slide switch for cooktop illumination n Slide switch for the fan mSlide switch for ,,Power selec- tion Air extractionContents Help to protect our environment Disposal of packagingDisposal of your old machine Save These Instructions and Review Them Periodically Page Disposal of discarded appliances Operation After cookingCleaning and care CleaningGrease filters Changing the light tube and/or starter Inserting or changing the active charcoal filtersAfter Sales Service Electrical connection For CDN onlyFor USA only Technical data Installation Appliance dimensions Wall unit dimensions 13/16˝Building Depth alignment Fitting the light tube cover Fitting the cover capsPreparing the lightshield Removing the transit strips DA 262Only use the template for lightshields Fitting the front facia panel / lightshield DismantlingAir extraction Connection for extractionConnection Calculation of extraction ducting BendAir recirculation Page Page