Franke Consumer Products FDF 6046, FDF 9046 manual Recirculation Version AIR Outlet

Mounting the hood body		Vr
• Before attaching the hood body, tighten the two screws Vr lo-
cated on the hood body mounting points.
• Hook the hood body onto the screws 12a.
• Fully tighten support screws 12a.
• Adjust screws Vr to level the hood body.	12a
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the	ø 150	ø 120
chimney using either a flexible or rigid pipe ø 150 or 120 mm,		9
the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert the re-
ducer flange 9 on the hood body outlet.

•Fix the pipe in position using sufficient pipe clamps (not sup- plied).

•Remove any activated charcoal filters.

14.1

	RECIRCULATION VERSION AIR OUTLET
•	Put connection 15 into the connection support 7.3.
•	Insert the connection extension pieces laterally 14.1 in connec-	15
	tion 15.
•	Make sure that the outlet of the extension pieces 14.1 is hori-	ø 150
	zontally and vertically aligned with the chimney outlets.
•	Connect the air outlet connection 15 to the hood body outlet
	using either a flexible or rigid pipe ø 150 mm, the choice of
	which is left to the installer.

• Ensure that the activated charcoal filters have been inserted.

EN	1
	17