Franke Consumer Products FCR 708-H TC manual Use, Control panel

USE

A B C D EF G H I L

Control panel

Button	Function	Display
A	Carriage Closed: If the button is pressed and held for at	Displays the set speed, 2 LED indicators per speed.
	least 1.5 seconds, the Carriage opens, the Motor starts
	at speed 2 and the Lights turn on at maximum intensity.
	Carriage Open: If the button is pressed briefly the
	Motor turns on/off. If the button is pressed and held for	N.B. If the Carriage blocks while closing due to
	at least 1.5 seconds, the Carriage closes and the Motor	obstacles or the like, it will block for 1 second and will
	switches off.	then open again.
B	Decreases the working speed.	The number of lighted segments decreases.
	Only active with the Carriage open.
C	Increases the working speed.	The number of lighted segments increases.
	Only active with the Carriage open.
D	Activates Intensive speed from any other speed, with	The indicator I flashes and all the segments on the
	the exception of Delay. This speed is set to operate for	Display are lit.
	10 minutes, after which the system returns to the speed	It is disabled by pressing the Button.
	that was set before. Suitable to deal with maximum
	levels of cooking fumes.
E	Can only be activated if Intensive and Delay are Off.	Displays 24 and the segments on the Display all light
	Starts the Motor at a speed that allows suction of 100	up and then turn off one at a time in cycle.
	m3/h for 10 minutes per hour, after which the Motor
	will stop (24H function).	It is disabled by pressing the Button or the Motor
	Carriage Closed: If the button is pressed briefly the	On/Off button (button A).
	function is activated.
	With the function active, if the Motor On/Off button is
	pressed and held for at least 1.5 seconds, the function is
	disabled, the Carriage opens, the Motor starts at speed 2
	and the Lights turn on at maximum intensity.
	Carriage Open: If the button is pressed briefly the
	Motor switches off, the Carriage closes and the
	function is activated.
F	Can only be activated if Intensive or 24H are Off.	Displays a flashing Clock symbol.
	Activates automatic switch-off with a 30’ delay.	It is disabled by pressing the button or turning the
	Suitable to complete elimination of residual odours.	motor off.
G	Performs a Reset of the Filter saturation alarm when	After 100 hours in operation the Drop symbol is
	the Button is pressed for approximately 2 seconds with	displayed to indicate saturation of the Metal Grease
	Motor and Lights Off.	Filters.
		After 200 hours in operation the letter C is displayed to
		indicate saturation of the Activated Charcoal filters.
H	Decreases the intensity of the Lighting each time the
	Button is pressed, in cycle.
I	Turns the lighting system on and off at maximum
	intensity.
L	Increases the intensity of the Lighting each time the
	Button is pressed, in cycle.

Keyboard Lock: it is possible to lock the keyboard, for example when cleaning the Glass surface, when the Hood has Motor and Lights turned off.

Press D (Intensive) for approximately 5 Seconds to enable or disable the Keyboard Lock, which is always confirmed by a Beep and an animation on the display Motor bar.

EN	8
	8