Operation
Extended drying
If the desired drying results are not consistently achieved, the turbothermic cooling fan can be programmed to run an extra 14 minutes at the end of each program.
The "Extended drying" feature can also be activated to prevent condensation from collecting on the steam deflector.
Turning extended drying on/off
^Turn off the dishwasher.
^Turn the program selector to "Stop".
^Press and hold the "Top Solo" button and at the same time turn the dishwasher on using the "On/Off" button.
Release the "Top Solo" button within two seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on, the rinse aid dispenser needs to be refilled.
If any other indicator is lit or flashing, the above steps must be repeated.
^Turn the program selector to the "9 o’clock" position.
If the "Top Solo" indicator is not lit: the extended drying time is off.
If the "Top Solo" indicator is lit: the extended drying time is on.
If the correct drying time is set:
^Turn off the dishwasher.
If the drying time is incorrect:
^Press the "Top Solo" button, to change the setting.
According to the previous setting the "Top Solo" indicator goes on or off.
^Turn the program selector to "Stop".
The changed extended drying option is stored.
^Turn off the dishwasher.
37