Miele G 851 SC Plus End, Start, Top Solo indicators, Flash at the same time at, End of a program?

Page 40

Frequently asked questions

What if …	Possible fault	Fix
the "End", "Start" and	There may be a technical	– Turn the program
"Top Solo" indicators	fault.	selector to "Stop".
flash at the same time at		– Turn off the dishwasher.
the end of a program?		A few seconds later:
		A few seconds later:
		– Turn the dishwasher on.
		– Select the desired
		program.
		– Press the "Start" button.
		If the indicators flash
		again, there is a technical
		problem.
		– Call the Miele Technical
		Service Department.
there is a knocking	The spray arm is hitting	Interrupt the program,
noise in the wash	an item in the basket.	rearrange items blocking
cabinet?		the spray arms.
there is a rattling noise?	Items are not secure in	Interrupt the program and
	the wash cabinet.	rearrange loose pieces.
there is a knocking	This may be caused by	This has no effect on the
noise in the water	the installation or the	dishwasher. If in doubt
pipes?	diameter of pipe.	contact a plumber.
the dishes are not dry,	The rinse aid setting may	Increase the dosage or
glasses and cutlery are	be too low, or the rinse aid	refill the reservoir, see
spotted?	reservoir is empty.	"Before using for the first
		time".
	Extended drying is not	Activate the Extended
	activated.	drying feature.
	Dishes were taken out too	Leave dishes in longer.
	soon.

40

Image 40

Contents Operating instructions Novotronic SC Plus Contents Operation Electrical safety InstallationUse Disposal of an appliance For dishwashers with a visible heating elementConsignes DE Sécurité Importantes Avertissement Sécurité électriqueConsignes DE Sécurité Importantes Mise au rebut de l’appareil UtilisationLave-vaisselle munis d’un élément chauffant visible Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel To open the door Before using for the first timeTo close the door Water softener Programming the water softener ExampleChecking the programmed water hardness Filling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicator Loading the dishwasher Do not rinse dishesGlassware Items not recommended for dishwashingSilver and aluminum Cutlery basket Cutlery tray SC units Upper basket Adjusting the upper basketSlide out the upper basket Adjustable cup racks Coffee bar Lower basket Removing an insert Lower basket insertsInserting an insert Foldable spike insert Foldable spikesPlateGuard Plus insert Basket accessories Operation Adding detergentRunning the dishwasher Program sequence indicatorWaterproof System Interrupting a program At the end of a programChanging a program Program When to use Program cycle Program guideAdditional features Top SoloExtended drying Turning extended drying on/offFrequently asked questions What if … Possible fault FixIndicator is lit or Indicator flashesFlashing Dishwasher may haveTop Solo indicators End, StartFlash at the same time at End of a program?Dishes are not clean? Tea or lipstick stainsHave not been Completely removed?Plastic items are Discolored?There are rust stains on Cutlery?Program update function PC After sales serviceMieleCare Transport User Maintenance Instructions Cleaning the filter in the wash cabinet Cleaning and CareTriple filter system Cleaning and Care Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Alterations rights reserved / G 851 Plus