Miele G 851 SC Plus operating instructions Cleaning the spray arms, Remove the lower basket

Page 48

Cleaning and Care

Cleaning the spray arms

Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months.

^Turn off the dishwasher before cleaning.

Remove the spray arms as follows:

^Remove the cutlery tray (if present).

^Press the top spray arm upwards to engage the inner ratchet and unscrew the spray arm.

^ Remove the lower basket.

^Pull the lower spray arm firmly upwards to remove.

^ Lift up the middle spray arm, a, to engage the ratchet and unscrew the

spray arm, b.

^ Use a pointed object such as a toothpick to push food particles into the spray arm jets.

^ Rinse thoroughly under running water.

^ Return the spray arms and check that they rotate freely.

48

Image 48
Contents Operating instructions Novotronic SC Plus Contents Operation Electrical safety InstallationUse Disposal of an appliance For dishwashers with a visible heating elementConsignes DE Sécurité Importantes Avertissement Sécurité électriqueConsignes DE Sécurité Importantes Utilisation Mise au rebut de l’appareilLave-vaisselle munis d’un élément chauffant visible Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel Before using for the first time To open the doorTo close the door Water softener Programming the water softener ExampleChecking the programmed water hardness Filling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicator Loading the dishwasher Do not rinse dishesItems not recommended for dishwashing GlasswareSilver and aluminum Cutlery basket Cutlery tray SC units Adjusting the upper basket Upper basketSlide out the upper basket Adjustable cup racks Coffee bar Lower basket Lower basket inserts Removing an insertInserting an insert Foldable spike insert Foldable spikesPlateGuard Plus insert Basket accessories Operation Adding detergentProgram sequence indicator Running the dishwasherWaterproof System At the end of a program Interrupting a programChanging a program Program When to use Program cycle Program guideAdditional features Top SoloExtended drying Turning extended drying on/offFrequently asked questions What if … Possible fault FixIndicator is lit or Indicator flashesFlashing Dishwasher may haveTop Solo indicators End, StartFlash at the same time at End of a program?Dishes are not clean? Tea or lipstick stainsHave not been Completely removed?Plastic items are Discolored?There are rust stains on Cutlery?After sales service Program update function PCMieleCare Transport User Maintenance Instructions Cleaning and Care Cleaning the filter in the wash cabinetTriple filter system Cleaning and Care Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Alterations rights reserved / G 851 Plus