Miele G 851 SC Plus Frequently asked questions, What if … Possible fault Fix

Page 38

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.

,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

	What if …	Possible fault	Fix
	the dishwasher does not	The door is not properly	Close the door firmly.
	start?	closed.
		The machine is not	Insert the plug.
		plugged in.
		The fuse is defective or	Reset the circuit breaker.
		the breaker has tripped.	Make sure it is a 15 A
			breaker.
	the dishwasher does not	The program selector is	– Turn the program
	start, after pressing the	set to "Stop".	selector to the desired
	"Start" button and		program.
	the "Start" indicator		– Press the "Start" button.
	flashes?
	the dishwasher stops	The fuse or breaker has	Reset the circuit breaker.
	during a program?	tripped.	Make sure it is a 15 A
			breaker.
	the "Intake/Drain"	The intake water has not	– Start the program
	indicator comes on	reached the required	again.
	during the "Energy	temperature of	– If the indicator light
	Saver" program?	115 °F/45 °C, the hot	– If the indicator light
	Saver" program?	115 °F/45 °C, the hot	comes on again, select
		water system may be	a different program.
		overloaded, see "Program	a different program.
		overloaded, see "Program
		guide".

38

Image 38

Contents Operating instructions Novotronic SC Plus Contents Operation Electrical safety InstallationUse Disposal of an appliance For dishwashers with a visible heating elementConsignes DE Sécurité Importantes Avertissement Sécurité électriqueConsignes DE Sécurité Importantes Lave-vaisselle munis d’un élément chauffant visible UtilisationMise au rebut de l’appareil Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel To close the door Before using for the first timeTo open the door Water softener Programming the water softener ExampleChecking the programmed water hardness Filling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicator Loading the dishwasher Do not rinse dishesSilver and aluminum Items not recommended for dishwashingGlassware Cutlery basket Cutlery tray SC units Slide out the upper basket Adjusting the upper basketUpper basket Adjustable cup racks Coffee bar Lower basket Inserting an insert Lower basket insertsRemoving an insert Foldable spike insert Foldable spikesPlateGuard Plus insert Basket accessories Operation Adding detergentWaterproof System Program sequence indicatorRunning the dishwasher Changing a program At the end of a programInterrupting a program Program When to use Program cycle Program guideAdditional features Top SoloExtended drying Turning extended drying on/offFrequently asked questions What if … Possible fault FixFlashing Indicator is lit orIndicator flashes Dishwasher may haveFlash at the same time at Top Solo indicatorsEnd, Start End of a program?Have not been Dishes are not clean?Tea or lipstick stains Completely removed?There are rust stains on Plastic items areDiscolored? Cutlery?MieleCare After sales serviceProgram update function PC Transport User Maintenance Instructions Triple filter system Cleaning and CareCleaning the filter in the wash cabinet Cleaning and Care Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Alterations rights reserved / G 851 Plus