Miele G 851 SC Plus operating instructions Electrical safety, Installation

Page 4

IMPORTANT SAFETY INSTRUCTIONS

WARNING –

When using your dishwasher, follow basic precautions, including the following:

Read all instructions before installation or use of the dishwasher to prevent injury and machine damage.

The manufacturer cannot be held responsible for damage or injury caused by improper use of this appliance.

Use the dishwasher only for its intended purpose. This appliance is intended for residential use only.

Keep these operating instructions in a safe place and pass them on to any future user.

Electrical safety

Before installation make sure that the voltage and frequency listed on

the data plate correspond with the household electrical supply. This data must correspond to prevent injury and machine damage. Consult a qualified electrician if in doubt.

Before installation or service, disconnect the power supply to the

work area by unplugging the unit, “tripping” the circuit breaker or removing the fuse.

Do not use an extension cord to connect this appliance to

electricity. Extension cords do not guarantee the required safety of the appliance (e.g. danger of overheating).

Be certain your appliance is properly installed and grounded by

a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. The manufacturer cannot be held responsible for damages caused by the lack, or inadequacy, of an effective grounding system.

Installation

Installation and repair work should be performed by a Miele

authorized service technician. Work by unqualified persons could be dangerous and could void the warranty.

,WARNING - Fire hazard

Do not cover or crush the plug of an electric appliance. Ensure that the cabinet opening for the dishwasher provides ample space for the plug. Installing the dishwasher in a tight space may crimp the power cord or put pressure on the plug which may cause overheating.

4

Image 4
Contents Operating instructions Novotronic SC Plus Contents Operation Electrical safety InstallationUse Disposal of an appliance For dishwashers with a visible heating elementConsignes DE Sécurité Importantes Avertissement Sécurité électriqueConsignes DE Sécurité Importantes Mise au rebut de l’appareil UtilisationLave-vaisselle munis d’un élément chauffant visible Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel To open the door Before using for the first timeTo close the door Water softener Programming the water softener ExampleChecking the programmed water hardness Filling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicator Loading the dishwasher Do not rinse dishesGlassware Items not recommended for dishwashingSilver and aluminum Cutlery basket Cutlery tray SC units Upper basket Adjusting the upper basketSlide out the upper basket Adjustable cup racks Coffee bar Lower basket Removing an insert Lower basket insertsInserting an insert Foldable spike insert Foldable spikesPlateGuard Plus insert Basket accessories Operation Adding detergentRunning the dishwasher Program sequence indicatorWaterproof System Interrupting a program At the end of a programChanging a program Program When to use Program cycle Program guideAdditional features Top SoloExtended drying Turning extended drying on/offFrequently asked questions What if … Possible fault FixIndicator is lit or Indicator flashesFlashing Dishwasher may haveTop Solo indicators End, StartFlash at the same time at End of a program?Dishes are not clean? Tea or lipstick stainsHave not been Completely removed?Plastic items are Discolored?There are rust stains on Cutlery?Program update function PC After sales serviceMieleCare Transport User Maintenance Instructions Cleaning the filter in the wash cabinet Cleaning and CareTriple filter system Cleaning and Care Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Alterations rights reserved / G 851 Plus