Miele G 886 manual Setting the water hardness selector in the wash cabinet, Example

Page 15

Before using for the first time

Setting the water hardness selector in the wash cabinet

^Turn off the dishwasher with the “On/Off” button.

The water hardness selector in the wash cabinet must be set according to the following table.

The correct water hardness setting will enhance wash results. Too high a setting will lead to poor cleaning results and an increase in water spots left on glasses, dishes and cutlery.

^Use a screwdriver to take the cover off the water hardness selector in the wash cabinet.

^Use a coin or screwdriver to adjust the water hardness selector. There is a click as each setting is reached.

gr/gal	ppm	Selector
		setting (level)

1- 7	20- 130	3
8-10	140- 180	2
11-14	200- 250	1
15-70	270-1260	0

The water hardness selector is preset to setting “3”.

Example:

For a water hardness level of 8 gr/gal (140 ppm).

Turn the water hardness level selector to setting 2 (8 - 10 gr/gal).

^Return the cover on the water hard- ness selector.

15

Image 15

Contents Operating instructions For G 886 dishwasher Contents Problem solving guide View of the dishwasher Guide to the applianceControl panel fascia Important Safety Instructions Important Safety Instructions Avertissement Conserver CES Instructions Energy saving washing Caring for the environmentDisposal of the packing material Disposal of an old machineBefore using for the first time To close the door To open the doorWater softener SettingsProgramming and changing the water hardness level Programming and setting the water hardness levelExample Setting the water hardness selector in the wash cabinetFilling the salt reservoir Bypassing the Salt indicator Salt indicatorAdding rinse aid Rinse aidRinse aid indicator Setting the dosage Loading the dishwasher Using Top Solo Loading examplesUpper basket Adjustable cup racks Slide the upper basket out Adjusting the upper basketLower basket Height limit Glassware insert Bottle holder Cutlery Items not suitable for dish- washers Please noteMiele recommends Adding detergent Operating the dishwasherEnergy Saver Program Program selectionStarting a program Turning on the dishwasherProgram sequence indicator lights Time displayLight ring Turning off the dishwasher At the end of a programChanging a program Interrupting a programTop Solo Additional featuresOperating the dishwasher Delay start Starting a program before the delay start period has elapsed How the delay start time is shown in the time displayUnloading the dishwasher Cleaning and care Filter indicator lightCleaning the filters in the wash cabinet Cleaning and care Remove the lower basket Cleaning the spray armsCleaning the door panel Cleaning the wash cabinetCleaning the door and the door seal Cleaning the control panelProblem Possible cause Remedy Problem solving guideProgram has started Indicator lightIntake/Drain is flash Ing shortly afterRattling noise Ing and the programDoes not continue Knocking noiseWater pipes Whistling noise isHeard during the pro GramDishes are not clean Dishes and glasses areNot dry or are flecked White residue is visible Tea or lipstick stainsHave not been com Pletely removedDiscolored film can not Smearing appears onGlasses and cutlery There is a bluish sheenWater remains Wash cabinet at the endA program Installing an in-line water filter Solving problemsCleaning the water intake filter Cleaning the filterCleaning the drain pump and non-return valve Solving problems Program update function PC After sales serviceSpecial accessories To make the most of your dishwasherIf you would like Then you need Transport Program When to use Detergent Program chartProgramcycle Usage Duration Series designation HG01 Technical dataPage Page