Miele G 886 Cleaning and care, Filter indicator light, Cleaning the filters in the wash cabinet

Page 40

Cleaning and care

Check your dishwasher regularly (approx. every 4 - 6 months) to avoid faults and problems.

The dishwasher must not be used without all filters in place.

“Filter” indicator light

The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it from en- tering the circulation system.

Collection of coarse soil may cause the filters to clog.

The level of soiling and time it takes be- fore the filters need cleaning will vary depending on household.

The “Filter” indicator light comes on af- ter every 40 program cycles. It serves as a reminder to check the filters in the wash cabinet.

Check the filter combination whenever the “Filter” indicator light comes on, and clean if necessary.

^Turn the program selector to the “Stop” position, the “Filter” indicator light will then go out.

The “Filter” indicator light will also go out when the dishwasher is turned off.

Cleaning the filters in the wash cabinet

^Turn the dishwasher off.

^Turn the handle counterclockwise to release the filter combination.

^Lift the filter combination out of the machine. Remove any coarse parti- cles and rinse the filter under running water. Use a nylon brush if neces- sary.

40

Image 40
Contents Operating instructions For G 886 dishwasher Contents Problem solving guide Guide to the appliance View of the dishwasherControl panel fascia Important Safety Instructions Important Safety Instructions Avertissement Conserver CES Instructions Caring for the environment Disposal of the packing materialDisposal of an old machine Energy saving washingBefore using for the first time To open the door To close the doorSettings Water softenerProgramming and setting the water hardness level Programming and changing the water hardness levelSetting the water hardness selector in the wash cabinet ExampleFilling the salt reservoir Salt indicator Bypassing the Salt indicatorRinse aid Adding rinse aidRinse aid indicator Setting the dosage Loading the dishwasher Loading examples Using Top SoloUpper basket Adjustable cup racks Adjusting the upper basket Slide the upper basket outLower basket Height limit Glassware insert Bottle holder Cutlery Please note Items not suitable for dish- washersMiele recommends Operating the dishwasher Adding detergentProgram selection Energy Saver ProgramTurning on the dishwasher Starting a programTime display Program sequence indicator lightsLight ring At the end of a program Turning off the dishwasherInterrupting a program Changing a programAdditional features Top SoloOperating the dishwasher Delay start How the delay start time is shown in the time display Starting a program before the delay start period has elapsedUnloading the dishwasher Filter indicator light Cleaning and careCleaning the filters in the wash cabinet Cleaning and care Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the door and the door sealCleaning the control panel Cleaning the door panelProblem solving guide Problem Possible cause RemedyIndicator light Intake/Drain is flashIng shortly after Program has startedIng and the program Does not continueKnocking noise Rattling noiseWhistling noise is Heard during the proGram Water pipesDishes and glasses are Dishes are not cleanNot dry or are flecked Tea or lipstick stains Have not been comPletely removed White residue is visibleSmearing appears on Glasses and cutleryThere is a bluish sheen Discolored film can notWash cabinet at the end Water remainsA program Solving problems Cleaning the water intake filterCleaning the filter Installing an in-line water filterCleaning the drain pump and non-return valve Solving problems After sales service Program update function PCTo make the most of your dishwasher Special accessoriesIf you would like Then you need Transport Program chart Program When to use DetergentProgramcycle Usage Duration Technical data Series designation HG01Page Page