Miele G 886 manual Indicator light, Intake/Drain is flash, Ing shortly after, Program has started

Page 45

Problem solving guide

Problem	Possible cause	Remedy
The indicator light	The water valve is closed.	Open the water valve
“Intake/Drain” is flash-		completely.
ing shortly after the		If the program still does
program has started		If the program still does
		not start:
		– Turn the program se-
		lector to the “Stop” po-
		sition.
		– Turn the dishwasher off
		using the “On/Off” but-
		ton.
		– Start the program
		again.

	The water pressure at the	Call a plumber.
	intake is lower than 5 psi
	(0.3 bar).

	The water inlet filter is	Before fixing the problem
	blocked.	you must:
		– Turn the program se-
		lector to the “Stop”
		position.
		– Turn the dishwasher
		off using the “On/Off”
		button.
		– Check the water inlet
		filter and clean if
		necessary.

The indicator light	The incoming water has	– Start the program
“Intake/Drain” comes on	not reached the minimum	again.
during the “Energy	required temperature of	– If the indicator light
Saver” program	115° F (45 °C), the hot	comes on again select
	water system may be	a different program.
	overloaded (see “Pro-
	gram selection”).

45

Image 45

Contents Operating instructions For G 886 dishwasher Contents Problem solving guide View of the dishwasher Guide to the applianceControl panel fascia Important Safety Instructions Important Safety Instructions Avertissement Conserver CES Instructions Disposal of the packing material Caring for the environmentDisposal of an old machine Energy saving washingBefore using for the first time To close the door To open the doorWater softener SettingsProgramming and changing the water hardness level Programming and setting the water hardness levelExample Setting the water hardness selector in the wash cabinetFilling the salt reservoir Bypassing the Salt indicator Salt indicatorAdding rinse aid Rinse aidRinse aid indicator Setting the dosage Loading the dishwasher Using Top Solo Loading examplesUpper basket Adjustable cup racks Slide the upper basket out Adjusting the upper basketLower basket Height limit Glassware insert Bottle holder Cutlery Items not suitable for dish- washers Please noteMiele recommends Adding detergent Operating the dishwasherEnergy Saver Program Program selectionStarting a program Turning on the dishwasherProgram sequence indicator lights Time displayLight ring Turning off the dishwasher At the end of a programChanging a program Interrupting a programTop Solo Additional featuresOperating the dishwasher Delay start Starting a program before the delay start period has elapsed How the delay start time is shown in the time displayUnloading the dishwasher Cleaning and care Filter indicator lightCleaning the filters in the wash cabinet Cleaning and care Remove the lower basket Cleaning the spray armsCleaning the door and the door seal Cleaning the wash cabinetCleaning the control panel Cleaning the door panelProblem Possible cause Remedy Problem solving guideIntake/Drain is flash Indicator lightIng shortly after Program has startedDoes not continue Ing and the programKnocking noise Rattling noiseHeard during the pro Whistling noise isGram Water pipesDishes are not clean Dishes and glasses areNot dry or are flecked Have not been com Tea or lipstick stainsPletely removed White residue is visibleGlasses and cutlery Smearing appears onThere is a bluish sheen Discolored film can notWater remains Wash cabinet at the endA program Cleaning the water intake filter Solving problemsCleaning the filter Installing an in-line water filterCleaning the drain pump and non-return valve Solving problems Program update function PC After sales serviceSpecial accessories To make the most of your dishwasherIf you would like Then you need Transport Program When to use Detergent Program chartProgramcycle Usage Duration Series designation HG01 Technical dataPage Page