Problem solving guide
Problem | Possible cause | Remedy |
Dishes and glasses are | The rinse aid setting may | Increase the dosage or |
not dry or are flecked | be insufficient, or the | refill the reservoir, see |
| rinse aid reservoir empty. | “Before using for the first |
|
| time”. |
|
|
|
| The water hardness level | Set the selector to a lower |
| selector in the wash cabi- | setting, See “Pro- |
| net is set too high. | gramming and setting the |
|
| water hardness level”. |
|
|
|
| Dishes were taken out of | Leave them in for longer, |
| the cabinet too soon. | see “Operating the dish- |
|
| washer”. |
|
|
|
The dishes are not clean | The dishes were not | See notes in “Loading the |
| loaded correctly. Dishes | dishwasher”. |
| were placed inside other |
|
| pieces, water could not |
|
| access all surfaces. |
|
|
|
|
| The water feed for the | Make sure that dishes in- |
| middle spray arm was | serted in the rear of the |
| covered. Not enough wa- | upper basket do not |
| ter flowed into the middle | cover the outlet. |
| spray arm. |
|
|
|
|
| The program was not | Select a more intensive |
| powerful enough. | program see the “Pro- |
|
| gram chart”. |
|
|
|
| Not enough detergent | Use more detergent, see |
| was dispensed. | “Operating the dish- |
|
| washer”. |
|
|
|
| Tall items are blocking | Rearrange items so that |
| the spray arms. | spray arms can rotate |
|
| freely. |
|
|
|
| The spray arm jets are | Clean the spray arm jets, |
| blocked. | see “Cleaning and care”. |
|
|
|
48