Miele G5975, G 5970 operating instructions Display function

Page 12

Before using for the first time

Display function

The following can be selected in the display:

the wash program

the options

the start time

the settings menu ￿

information

During a running program the display shows:

the program name

the current time of day

the program sequence

the approximate remaining time

faults and messages

To save energy the dishwasher turns off after a few minutes if no button is pressed. To turn the dishwasher back on press ￿.

￿

A bullet in the display next to the button shows that this function can be selected.

￿

The arrows in the display indicate that more selections or text follow and can be displayed with the respective control.

- - - - - -

A dotted line is shown to indicate the last selection available.

OK

To confirm these messages or settings select OK, and the next menu or another menu level will appear.

￿

The currently selected option is marked with a check.

The "Settings ￿" menu allows you to customize the dishwasher settings. See "Settings" for more information.

12

Image 12
Contents Operating Instructions Dishwasher 5970 G Important Safety Instructions ContentsContents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the doorTo close the door Display function Language setting Welcome screenClock format Time of day Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackVase / Bottle insert Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Setting the clock format LanguageTime of day Set the time of dayWater hardness Adjust Sensor Wash Drying PlusOptimize standby Refill displayCheck filters Reorganize programs Temperature Save optionsBuzzer Keypad tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program onRemoteVision Frequently asked questions Technical faultsProblem Possible fault Solution Optical interface Shows the faultFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Fault Flashes fastProgram Energy Saver displaysGeneral problems with the dishwasher Problem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Plumbing DrainageVenting the drainage system Installation requirements for measuring noise Noise measurementGeneral requirements for measuring noise Noise measurement Page Page Page Alteration rights reserved Nr 909 281 G5970/G5975
Related manuals
Manual 84 pages 49.27 Kb