Miele G5975, G 5970 operating instructions Hardwired electrical connection

Page 80

Electrical connection

Hardwired electrical connection

It is possible to hardwire this appliance to an existing power cable.

CAUTION: Before servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker.

Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unqualified persons could be dangerous and the manufacturer cannot be held responsible.

Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent machine damage. Consult an electrician if in doubt.

GROUNDING INSTRUCTIONS

THIS APPLIANCE MUST BE GROUNDED.

This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

Prior to making a hardwire connection to the terminal, remove the power cord. Otherwise there will be a risk of electric shock from the attached plug.

An existing flexible supply cord or cable shall have a minimum thickness of AWG 14.

120 V, 60 Hz, 15 A fuse rating

Black wire (live):

connect to L

White wire (neutral): connect to N

Green wire (ground): connect to

After attaching the permanent power supply cord, check that all screws on the terminal block and the strain relief are tightened.

80

Image 80

Contents Operating Instructions Dishwasher 5970 G Important Safety Instructions ContentsContents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Display function Clock format Language settingWelcome screen Time of day Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Hinged cup rack Upper basketFoldable spikes Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackVase / Bottle insert Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Setting the clock format LanguageTime of day Set the time of dayWater hardness Adjust Sensor Wash Drying PlusCheck filters Optimize standbyRefill display Reorganize programs Buzzer TemperatureSave options Keypad tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program onRemoteVision Frequently asked questions Technical faultsProblem Possible fault Solution Optical interface Shows the faultFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Fault Flashes fastProgram Energy Saver displaysGeneral problems with the dishwasher Problem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Venting the drainage system PlumbingDrainage General requirements for measuring noise Installation requirements for measuring noiseNoise measurement Noise measurement Page Page Page Alteration rights reserved Nr 909 281 G5970/G5975

Related manuals

Manual 84 pages 49.27 Kb