Miele G5975, G 5970 operating instructions Poor cleaning results

Page 64

Frequently asked questions

Poor cleaning results

Problem	Possible fault	Solution
The dishes are not	The dishes were not	See "Loading the
clean.	loaded correctly.	dishwasher".
	The program was not	Select a more intensive
	powerful enough.	program (see "Program
		Guide").
	Not enough detergent was	Use more detergent, or
	dispensed.	change the detergent.
	The spray arms are	Turn the spray arms and
	blocked.	rearrange the dishes if
		necessary.
	The triple filter in the wash	Clean the filter and insert it
	cabinet is clogged or not	correctly. Clean the spray
	correctly inserted.	arm jets, if required (see
	The spray arm jets might	"Cleaning and care").
	be clogged as a result.
	The non-return valve is	Clean the drain pump and the
	stuck open and blocked.	non-return valve (see
	Wash water will run back	"Cleaning and care").
	into the wash cabinet.
Glasses and cutlery	The rinse aid dosage is	Reduce the dosage (see
show streaks. The	set too high.	"Settings - Rinse aid").
glasses take on a
bluish shimmer; the
deposits can be
wiped off.

64

Image 64

Contents Operating Instructions Dishwasher 5970 G Important Safety Instructions ContentsContents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo open the door Before using for the first timeTo close the door Display function Welcome screen Language settingClock format Time of day Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Foldable spikes Upper basketHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackVase / Bottle insert Cutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Settings menu allows you to adjust standard settings SettingsOpening the Settings menu Setting the clock format LanguageTime of day Set the time of dayWater hardness Adjust Sensor Wash Drying PlusRefill display Optimize standbyCheck filters Reorganize programs Save options TemperatureBuzzer Keypad tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program onRemoteVision Frequently asked questions Technical faultsProblem Possible fault Solution Optical interface Shows the faultFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Fault Flashes fastProgram Energy Saver displaysGeneral problems with the dishwasher Problem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Disposal of the packing material Help to protect the environmentDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Drainage PlumbingVenting the drainage system Noise measurement Installation requirements for measuring noiseGeneral requirements for measuring noise Noise measurement Page Page Page Alteration rights reserved Nr 909 281 G5970/G5975

Related manuals

Manual 84 pages 49.27 Kb