Miele G 5970, G5975 operating instructions Save options, Temperature, Buzzer

Page 53

Settings

Save options

Additional options can be selected for some programs, e.g. extended drying. See "Use - Selecting options".

Save options allows you to save the selected options for future use of the program.

This function is turned off by default.

Select the desired setting and confirm with OK.

Temperature

The temperature can be displayed in "°C/Celsius" or "°F/Fahrenheit".

The temperatures are shown in °C/Celsius by default.

Select the desired temperature unit and confirm with OK.

Buzzer

When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs.

The buzzer at the end of a program is turned on by default.

Buzzer at the end of a program

The buzzer at the end of a program sounds five times in intervals with a brief break in between. The buzzer sounds up to one hour if the dishwasher in not turned off.

Buzzer in case of a fault

The buzzer for a fault sounds continuously. The buzzer sounds up to two minutes if the dishwasher is not turned off or the fault is fixed.

The buzzer for a fault cannot be set to off.

Buzzer tone

The buzzer volume can be set to 17 different levels.

The buzzer cannot be turned off in case of a fault.

Select the desired volume.

Confirm with OK.

53

Image 53

Contents Operating Instructions Dishwasher 5970 G Contents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Display function Clock format Language settingWelcome screen Water hardness Time of dayRinse aid and/or Add salt may Filling the salt container Salt refill message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Hinged cup rack Upper basketFoldable spikes Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basketTo remove the insert Removable MultiComfort insertTo replace the insert Glass rackVase / Bottle insert Split cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Selecting a program Turning onProgram guide When to use Program sequence Normally soiled dishware UsageSelecting options Time display Starting a programAt the end of a program StandbyInterrupting a program Preparing your appliance for an extended vacationChanging a program Additional options Delay startStarting a program before the delay start has elapsed BrilliantLight Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Language Setting the clock formatTime of day Set the time of dayWater hardness Drying Plus Adjust Sensor WashCheck filters Optimize standbyRefill display Reorganize programs Buzzer TemperatureSave options Brightness Keypad toneMemory RemoteVisionLeaving the Settings menu Factory defaultShowroom program Turning the Showroom program onRemoteVision Technical faults Frequently asked questionsShows the fault Problem Possible fault Solution Optical interfaceFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Flashes fast FaultProgram Energy Saver displaysGeneral problems with the dishwasher Dispenser at the end Problem Possible fault Solution Detergent is leftA program Detergent lidSounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionPlumbing Venting the drainage system PlumbingDrainage General requirements for measuring noise Installation requirements for measuring noiseNoise measurement Noise measurement Page Page Page Alteration rights reserved Nr 909 281 G5970/G5975

Related manuals

Manual 84 pages 49.27 Kb