Miele G 5970, G5975 operating instructions Optimize standby, Refill display, Check filters

Page 51

Settings

Optimize standby

A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy.

This function can also be turned off. The dishwasher will then turn off completely after 6 hours.

Select the desired setting and confirm with OK.

If refill salt and/or rinse aid or an fault are present in the display, the dishwasher will not turn off.

The refill messages can be turned off when you use a tab detergent (see "Settings-Refill display"). Fault messages cannot be turned off.

Refill display

When consistently using multi-function Tab detergents, you can turn off the refill displays.

Select the desired setting and confirm with OK.

Be sure to turn this setting back on if you stop using multi-function tab detergents.

Check filters

This selection allows you to set the number of programs run before the filter check message shows.

You can select between 30 and 60 programs.

The filter check message is set by default to 50 programs.

Select the desired number of programs and confirm with OK.

51

Image 51

Contents Operating Instructions Dishwasher 5970 G Contents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentBefore using for the first time To open the doorTo close the door Display function Language setting Welcome screenClock format Water hardness Time of dayRinse aid and/or Add salt may Filling the salt container Salt refill message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Upper basket Foldable spikesHinged cup rack Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basketGlass rack Removable MultiComfort insertTo remove the insert To replace the insertVase / Bottle insert Split cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Selecting a program Turning onProgram guide When to use Program sequence Normally soiled dishware UsageSelecting options Time display Starting a programAt the end of a program StandbyInterrupting a program Preparing your appliance for an extended vacationChanging a program Additional options Delay startStarting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Set the time of day Setting the clock formatLanguage Time of dayWater hardness Drying Plus Adjust Sensor WashOptimize standby Refill displayCheck filters Reorganize programs Temperature Save optionsBuzzer RemoteVision Keypad toneBrightness MemoryTurning the Showroom program on Factory defaultLeaving the Settings menu Showroom programRemoteVision Technical faults Frequently asked questionsSounds or the display Problem Possible fault Solution Optical interfaceShows the fault Flashes fast, the buzzerProblems water intake/drain Saver displays FaultFlashes fast Program EnergyGeneral problems with the dishwasher Detergent lid Problem Possible fault Solution Detergent is leftDispenser at the end A programSounds Poor cleaning results Spotted Problem Possible fault Solution Dishes are not dryGlasses Cutlery areDiscolored film Problem Possible fault Solution Glasses have aBrown or blue Discoloration film Cannot be wiped off Glasses are dullMieleCare After sales servicePC Update RepairsTransport User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionPlumbing Plumbing DrainageVenting the drainage system Installation requirements for measuring noise Noise measurementGeneral requirements for measuring noise Noise measurement Page Page Page Alteration rights reserved Nr 909 281 G5970/G5975

Related manuals

Manual 84 pages 49.27 Kb