Miele G 5970, G5975 operating instructions Frequently asked questions, Technical faults

Page 57

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.

Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

Problem	Possible fault	Solution
The program does not	The door is not properly	Close the door firmly.
start.	closed.
	The machine is not	Insert the plug.
	plugged in.
	The fuse has tripped.	Reset the circuit breaker.
		See data plate for
		minimum amperage.
	The dishwasher is not	Press and select a
	turned on.	program.
	No program is selected.	Select the desired
		program.
The dishwasher stops	The fuse has tripped.	Reset the circuit breaker.
during a program.		See data plate for
		minimum amperage.
The optic indicator is	The reflector was not	Install the reflector
not visible when a	properly installed.	properly, see the
program has started.		Installation diagram.

57

Image 57

Contents Operating Instructions Dishwasher 5970 G Contents Important Safety InstructionsContents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentBefore using for the first time To open the doorTo close the door Display function Language setting Welcome screenClock format Water hardness Time of dayRinse aid and/or Add salt may Filling the salt container Salt refill message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings with cutlery tray Typical load for 16 place settings with cutlery tray Upper basket Foldable spikesHinged cup rack Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basketTo remove the insert Removable MultiComfort insertTo replace the insert Glass rackVase / Bottle insert Split cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Selecting a program Turning onProgram guide When to use Program sequence Normally soiled dishware UsageSelecting options Time display Starting a programAt the end of a program StandbyInterrupting a program Preparing your appliance for an extended vacationChanging a program Additional options Delay startStarting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Language Setting the clock formatTime of day Set the time of dayWater hardness Drying Plus Adjust Sensor WashOptimize standby Refill displayCheck filters Reorganize programs Temperature Save optionsBuzzer Brightness Keypad toneMemory RemoteVisionLeaving the Settings menu Factory defaultShowroom program Turning the Showroom program onRemoteVision Technical faults Frequently asked questionsShows the fault Problem Possible fault Solution Optical interfaceFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Flashes fast FaultProgram Energy Saver displaysGeneral problems with the dishwasher Dispenser at the end Problem Possible fault Solution Detergent is leftA program Detergent lidSounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionPlumbing Plumbing DrainageVenting the drainage system Installation requirements for measuring noise Noise measurementGeneral requirements for measuring noise Noise measurement Page Page Page Alteration rights reserved Nr 909 281 G5970/G5975

Related manuals

Manual 84 pages 49.27 Kb