Before using for the first time
25 - 70 gr/gal:
^Press the program selection button % (19) until the "Rinse" (16) indicator begins to flash.
This is the second program level.
^Use the program selection buttons (19) to select the program which cor- responds to the local water hardness in your area.
Table 2:
gr/gal | ppm | Program indicator | |
|
|
|
|
25 - 31 | 450 | - 560 | Pots & Pans |
|
|
|
|
32 - 70 | 570 | - 1260 | Sani Wash |
|
|
|
|
The selected program indicator (14) and the "Rinse" (16) indicator will flash.
^To store this setting press the "Start/Stop" button (17) twice.
^Turn the dishwasher off with the "On/Off" button (13).
Checking the programmed water hardness
^Make sure the dishwasher is turned off.
^Press and hold the "Start/Stop" button
(17)and at the same time turn on the dishwasher with the "On/Off" button
(13).Release the "Start/Stop" button within two seconds.
The programmed water hardness is in- dicated by:
1 - 24 gr/gal
Lit program indicator (see table1). Lit "Rinse" (16) indicator.
25 - 70 gr/gal
Lit program indicator (see table 2). Flashing "Rinse" (16) indicator.
^Turn the dishwasher off with the "On/Off" button (13).
16