Miele G 832 SC manual Cleaning the spray arms, Remove the lower basket

Page 44

Cleaning the spray arms

Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months.

^Turn off the dishwasher before clean- ing.

Remove the spray arms as follows:

^Remove the cutlery tray (if present).

^Press the top spray arm upwards to engage the inner ratchet and un- screw the spray arm.

^ Remove the lower basket.

^Pull the lower spray arm firmly up- wards to remove.

^Lift up the middle spray arm, a, to engage the ratchet and unscrew the spray arm, b.

^Use a pointed object such as a tooth- pick to push food particles into the spray arm jets.

^Rinse thoroughly under running water.

^Return the spray arms and check that they rotate freely.

44

Image 44
Contents Operating instructions Touchtronic 832 SC Contents Operation Electrical safety InstallationUse Disposal of an appliance For dishwashers with visible heating elementConsignes DE Sécurité Avertissement Sécurité électriqueConsignes DE Sécurité Lave-vaisselle munis d’un élément chauffant visible UtilisationMise au rebut de l’appareil Caring for the environment Energy saving washingGuide to the dishwasher Wash cabinetControl panel To close the door Before using for the first timeTo open the door Water softener Programming the water softener 24 gr/gal25 70 gr/gal Checking the programmed water hardnessFilling the salt reservoir Salt indicator Bypassing the salt indicatorRinse aid Adding rinse aidAdjusting the dosage Rinse aid indicator Loading the dishwasher Do not rinse dishesSilver and aluminum Items not recommended for dishwashingGlassware Cutlery tray SC units Slide out the upper basket Adjusting the upper basketUpper basket Adjustable cup racks Coffee barLower basket Foldable spikesHeight limit Vase / Bottle holder select modelsBasket accessories Operation Adding detergentWaterproof System Program sequence indicatorRunning the dishwasher Changing a program At the end of a programInterrupting a program Program When to use Program cycle Program guideAdditional features Top SoloExtended drying Turning extended drying on/offFrequently asked questions What if … Possible fault FixDrain indicator Flashes and the programStops? End, Start/StopDishes are not clean? There is a knockingNoise in the wash cabi Net?Tea or lipstick stains Have not been comPletely removed? White residue is visiblePlastic items are discol Ored?There are rust stains on Cutlery?After sales service Program update function PCTransport User Maintenance Instructions Cleaning the filter in the wash cabinet Triple filter systemPage Cleaning the spray arms Remove the lower basketCleaning the wash cabinet Cleaning the exterior Cleaning the door and door sealCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Alterations rights reserved / G 832 Plus