Before using for the first time
Programming the water softener
Your water hardness level must be pro- grammed into the dishwasher using the buttons on the control panel.
^Make sure the dishwasher is turned off.
^Press and hold the "Start/Stop" button
(17)and at the same time turn on the dishwasher with the "On/Off" button
(13).Release the "Start/Stop" button within two seconds.
The "Rinse" (16) indicator and the Pots
&Pans indicator (14) will light and the "Salt" (15) indicator will flash.
If this is not the case, the above steps must be repeated.
1 - 24 gr/gal:
^Use the program selection buttons (19) to select the program which cor- responds to the local water hardness.
Table 1:
gr/gal* | ppm | Program indicator | |||
|
|
|
|
| |
1 - | 4** | 20 | - 70 | Pots & Pans | |
|
|
|
|
|
|
5 | - | 7 | 90 | - 130 | Sani Wash |
|
|
|
|
| |
8 | - 11 | 140 | - 200 | Normal Plus | |
|
|
|
| ||
12 - 16 | 220 | - 280 | Normal | ||
|
|
|
| ||
17 - 21 | 300 | - 370 | China & Crystal | ||
|
|
|
| ||
22 - 24 | 390 | - 430 | Rinse and Hold | ||
|
|
|
|
|
|
*US gallons
**factory preset
The selected program indicator (14) will flash and the "Rinse" (16) indicator will light.
^To store this setting press the "Start/Stop" (17) button twice.
^Turn off the dishwasher with the "On/Off" button (13).
15