Operation
Extended drying
If desired drying results are not consis- tently achieved, the turbothermic cool- ing fan can be programmed to run an extra 14 minutes at the end of each program.
The "Extended drying" feature can also be activated to prevent condensation from collecting on the steam deflector.
Turning extended drying on/off
^Make sure the dishwasher is turned off.
^Press and hold the "Start/Stop" (17) button and at the same time turn the dishwasher on using the "On/Off" but- ton.
Release the "Start/Stop" button within two seconds.
^Press the "Top Solo" (18) button.
The "Salt" (15) indicator will flash and the "End" (16) indicator will light.
If this is not the case, the above steps must be repeated.
The extended drying time is off if the top program indicator flashes.
The extended drying time is on if the top program indicator lights.
If the the correct drying time is set:
^Turn off the dishwasher.
If the drying time is incorrect:
^Press the "Top Solo" button (18).
^Press the "Start/Stop" (17) button twice.
The "Start/Stop" (17) indicator will flash.
The changed extended drying option will be stored.
^Turn off the dishwasher.
33