Miele G 832 SC manual Rinse aid, Adding rinse aid

Page 19

Before using for the first time

Rinse aid

Rinse aid is recommended to prevent spotting on dishes and glassware.

,Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the reservoir.

Adding rinse aid

^Add rinse aid before the first use and whenever the "Rise aid" indicator lights.

^Press the button in the direction of the arrow until the flap springs open.

^Pour liquid rinse aid into the reservoir until it is visible on the surface of the screen.

^Press on the flap until you hear it click shut. Failure to close it all the way will allow water to enter the res- ervoir during the wash program.

^Wipe up any spilled rinse aid. The flap will remain closed during normal operation.

19

Image 19
Contents Operating instructions Touchtronic 832 SC Contents Operation Installation Electrical safetyUse For dishwashers with visible heating element Disposal of an applianceSécurité électrique Consignes DE Sécurité AvertissementConsignes DE Sécurité Mise au rebut de l’appareil UtilisationLave-vaisselle munis d’un élément chauffant visible Energy saving washing Caring for the environmentWash cabinet Guide to the dishwasherControl panel To open the door Before using for the first timeTo close the door Water softener 24 gr/gal Programming the water softenerChecking the programmed water hardness 25 70 gr/galFilling the salt reservoir Bypassing the salt indicator Salt indicatorAdding rinse aid Rinse aidAdjusting the dosage Rinse aid indicator Do not rinse dishes Loading the dishwasherGlassware Items not recommended for dishwashingSilver and aluminum Cutlery tray SC units Upper basket Adjusting the upper basketSlide out the upper basket Coffee bar Adjustable cup racksVase / Bottle holder select models Lower basketFoldable spikes Height limitBasket accessories Adding detergent OperationRunning the dishwasher Program sequence indicatorWaterproof System Interrupting a program At the end of a programChanging a program Program guide Program When to use Program cycleTop Solo Additional featuresTurning extended drying on/off Extended dryingWhat if … Possible fault Fix Frequently asked questionsEnd, Start/Stop Drain indicatorFlashes and the program Stops?Net? Dishes are not clean?There is a knocking Noise in the wash cabiWhite residue is visible Tea or lipstick stainsHave not been com Pletely removed?Cutlery? Plastic items are discolOred? There are rust stains onProgram update function PC After sales serviceTransport User Maintenance Instructions Triple filter system Cleaning the filter in the wash cabinetPage Remove the lower basket Cleaning the spray armsCleaning the door and door seal Cleaning the wash cabinet Cleaning the exteriorInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Alterations rights reserved / G 832 Plus