Miele G 832 SC Drain indicator, Flashes and the program, Stops?, End, Start/Stop, Top Solo indica

Page 35

Frequently asked questions

What if …	Possible fault	Fix
the "Drain" indicator	The triple filter in the wash	Clean the filter, see main-
flashes and the program	cabinet is clogged.	tenance instructions.
stops?	The drain pump or the	Clean the drain pump and
	non-return valve may be	the non-return valve, see
	blocked.	maintenance instructions.
	The drain hose is kinked.	Remove the kink.
the "End", "Start/Stop"	There may be a technical	– Press the "Start/Stop"
and "Top Solo" indica-	fault.	button.
tors flash at the same		– Turn off the dishwasher.
time at the end of a pro-		A few seconds later:
gram?		A few seconds later:
gram?		– Turn the dishwasher on.
		– Turn the dishwasher on.
		– Select the desired pro-
		gram.
		– Press the "Start/Stop"
		button.
		If the indicators flash
		again, there is a technical
		problem.
		– Call the Miele Technical
		Service Department.

35

Image 35

Contents Operating instructions Touchtronic 832 SC Contents Operation Installation Electrical safetyUse For dishwashers with visible heating element Disposal of an applianceSécurité électrique Consignes DE Sécurité AvertissementConsignes DE Sécurité Lave-vaisselle munis d’un élément chauffant visible UtilisationMise au rebut de l’appareil Energy saving washing Caring for the environmentWash cabinet Guide to the dishwasherControl panel To close the door Before using for the first timeTo open the door Water softener 24 gr/gal Programming the water softenerChecking the programmed water hardness 25 70 gr/galFilling the salt reservoir Bypassing the salt indicator Salt indicatorAdding rinse aid Rinse aidAdjusting the dosage Rinse aid indicator Do not rinse dishes Loading the dishwasherSilver and aluminum Items not recommended for dishwashingGlassware Cutlery tray SC units Slide out the upper basket Adjusting the upper basketUpper basket Coffee bar Adjustable cup racksVase / Bottle holder select models Lower basketFoldable spikes Height limitBasket accessories Adding detergent OperationWaterproof System Program sequence indicatorRunning the dishwasher Changing a program At the end of a programInterrupting a program Program guide Program When to use Program cycleTop Solo Additional featuresTurning extended drying on/off Extended dryingWhat if … Possible fault Fix Frequently asked questionsEnd, Start/Stop Drain indicatorFlashes and the program Stops?Net? Dishes are not clean?There is a knocking Noise in the wash cabiWhite residue is visible Tea or lipstick stainsHave not been com Pletely removed?Cutlery? Plastic items are discolOred? There are rust stains onProgram update function PC After sales serviceTransport User Maintenance Instructions Triple filter system Cleaning the filter in the wash cabinetPage Remove the lower basket Cleaning the spray armsCleaning the door and door seal Cleaning the wash cabinet Cleaning the exteriorCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Alterations rights reserved / G 832 Plus