Miele KM391 Using the cooktop, Fast-Ignition-System, Turning on and off / Regulating

Page 11

Using the cooktop

Fast-Ignition-System

Auxiliary / Normal / Fast burner

The gas cooktops are equipped with a Fast-Ignition-System which incorporates the following features:

The control knob can be released once it is turned to the largest flame symbol.

If the flame goes out during use, e.g. from a draft, the burner will auto- matically reignite.

If reignition is unsuccessful, the gas supply will automatically be cut (see "Safety feature").

As a result of the Fast-Ignition-System, the ignition stays activated for a few seconds, even when the flame is already lit.

To prevent a gas leak, the Fast-Ignition-System will click until the safety thermostat is activated.

Turning on and off / Regulating

The control knob is used to light the burner and to regulate the strength of the flame.

ßCooktop is turned off

&Highest flame

/Lowest flame

Wok burner

ßCooktop is turned off

*Highest flame:

inner and outer burner

are both at their highest setting.

&High flame:

outer burner is at the lowest setting, inner burner is at the highest setting.

+Low flame:

outer burner is turned off,

inner burner is at the highest setting.

/Lowest flame:

outer burner is turned off,

inner burner is at the lowest setting.

11

Image 11
Contents Operating Instructions Gas Cooktop What to do if YOU Smell GAS Contents Installation and connection Important Safety InstructionsProtection from damage Correct usagePersonal safety Damage to the appliance Further safety notesGuide to the cooktop Wok burner Cleaning the cooktop Before using the cooktopTurning on and off / Regulating Using the cooktopFast-Ignition-System Turning off Turning onRegulating the wok burner Wok burners Pan sizeSuitable pans Using the cooktop during a power failure Safety featureCeramic surface Cleaning and careGrates, Control Knobs Reassembling Auxiliary, Normal and Fast burner Dismantling and cleaningBurner Reassembling the wok burner Igniters no longer work Frequently asked questionsBurners do not ignite after several attempts Possible fault Flame goes out after being litMieleCare Technical ServiceInstallation Instructions Recommended Not recommended Not allowed InstallationSafety distances above the appliance Appliance dimensions Installation Securing the cooktop Setting the cooktop into placeSealing Electrical connection Power supplyWiring diagram Gas connection Gas pressure regulator Nominal Rating Table Converting to another type of gas Disposal of an old appliance Help protect our environmentDisposal of packing materials Page Alterations rights reserved