Miele KM391 operating instructions Converting to another type of gas

Page 33

Converting to another type of gas

The cooktop should have been ordered for connection to either natural or LP gas.

If the cooktop is not configured for the proper type of gas connection please contact your Miele Dealer.

If the appliance is to be connected to a type of gas other than it was originally configured for, both the regulator and burners must be converted. A conversion kit is available as an optional accessory from the Miele Technical Service Department.

33

Image 33

Contents Operating Instructions Gas Cooktop What to do if YOU Smell GAS Contents Installation and connection Important Safety InstructionsProtection from damage Correct usagePersonal safety Damage to the appliance Further safety notesGuide to the cooktop Wok burner Cleaning the cooktop Before using the cooktopUsing the cooktop Fast-Ignition-SystemTurning on and off / Regulating Turning off Turning onRegulating the wok burner Pan size Suitable pansWok burners Using the cooktop during a power failure Safety featureCleaning and care Grates, Control KnobsCeramic surface Dismantling and cleaning BurnerReassembling Auxiliary, Normal and Fast burner Reassembling the wok burner Burners do not ignite after several attempts Possible fault Frequently asked questionsFlame goes out after being lit Igniters no longer workMieleCare Technical ServiceInstallation Instructions Recommended Not recommended Not allowed InstallationSafety distances above the appliance Appliance dimensions Installation Securing the cooktop Setting the cooktop into placeSealing Electrical connection Power supplyWiring diagram Gas connection Gas pressure regulator Nominal Rating Table Converting to another type of gas Help protect our environment Disposal of packing materialsDisposal of an old appliance Page Alterations rights reserved