Cleaning and care
Burner
The burner can be dismantled and cleaned when completely cool.
Dismantling and cleaning
^Remove the burner parts and wash them in a solution of warm water and liquid dish soap.
^Dry them thoroughly. Make sure that the flame holes are clean and completely dry.
The shiny surfaces of the burner caps will dull with time and usage. This is normal and will not affect the operation of the cooktop.
^Wipe the burner base clean with a damp cloth and then dry.
^Gently wipe the ignitor and Ignition Safety Control with a damp cloth, and then dry with a soft cloth.
The ignitor must be thoroughly dry or it will not spark.
Reassembling Auxiliary, Normal and Fast burner
Be careful not to mix up the parts. Make sure that all the locating tabs and notches align exactly.
^Place the burner head, b, onto the burner base, a, so that the Ignition Safety Control and ignitor extend through their respective holes.
^Return the burner cap, c.
^Return the grate.
17