Use
Time display
Before the program starts, the time display shows the running time of the selected program in hours and minutes. During the running program the remaining time shows in the time display.
The running time for the same program may vary depending on the intake water temperature, load size and soiling.
When a program is selected for the first time, a time is shown which equals an average program running time with cold water.
The time values in the program guide correspond to the program running times with standard loads and temperatures.
Each time a program is run, the electronic adjusts the program running time according to the intake water temperature and the load size.
Glasscare indicator
The green Glasscare indicator lights when a program is selected which washes glasses especially gently.
Program sequence indicator
The current step of a wash program is indicated by the program sequence indicator.
At the end of a program
Once the program has been finished, the time display shows 0 and the "End" indicator lights.
Dishes tends to chip if removed still hot from the dishwasher.
Let the dishware cool.
After turning off the dishwasher open the door slightly. The dishes will cool much faster.
^Unload the dishwasher.
^Turn the dishwasher off s.
The dishwasher continues to use electricity until turned off with the s button.
^If the dishwasher is not used for a longer period of time, e.g. vacationing, turn off the water supply.
31