Miele G 2420 G 2430 operating instructions Frequently asked questions, Technical faults

Page 36

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service call.

,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage.

Technical faults

Issue	Possible fault	Solution
The Start/Stop indicator	The machine is not	Insert the plug.
does not flash after the	plugged in.
dishwasher was turned	The fuse has tripped.	Reset the circuit breaker.
on with s.		Make sure it is a 15 A
		breaker.
The dishwasher stops	The fuse has tripped.	Reset the circuit breaker.
during a program.		Make sure it is a 15 A
		breaker.
The program cycle	There may be a technical	– Turn the dishwasher off
indicators "Rinse",	fault.	s.
"Drying" and "End"		After a few seconds:
flash simultaneously.		– Turn the dishwasher on.
The time display shows		– Turn the dishwasher on.
The time display shows		– Select the desired
FXX.		– Select the desired
FXX.		program with the
		program with the
		program button.
		– Press the "Start/Stop"
		button.
		If the problem persists call
		Technical Service.
The drain pump is	Fault F70:	– Turn off the water
running when the door	The waterproof system	supply.
is open.	has activated.	– Call Miele Technical
		Service.

36

Image 36

Contents Operating instructions Optima Series 2420 2430 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the door Child Safety LockTo close the door Water softener Checking the water hardnessFilling the salt container Salt indicator Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosageLoading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Cutlery tray Cutlery basket Spoon inserts for the cutlery basketUpper basket Coffee barCup racks Removable spike insert Removing the insert aInserting the insert b Adjusting the upper basket Slide out the upper basketLower basket Lower basket inserts PlateGuard Plus with StemGuard Bottle holderFoldable Spike insert Removing an insert aInserting an insert b Basket accessories Use DetergentAdding detergent Turning on Selecting a programStarting a program Program When to use Program sequence Program guideUsage Glasscare indicator Program sequence indicatorTime display At the end of a programInterrupting a program Changing a programDetergent settings Additional functionsGel Delay start Delay start displayStarting a program before the delay start has elapsed Default setting Frequently asked questions Technical faultsProblems water intake/drain General problems with the dishwasher Sounds Poor cleaning results Issue Possible fault Fix Dishes are not dry Are spottedWhite residue is Visible on cutleryIssue Possible fault Fix Glasses are Discolored Film cannot be wiped Off Glasses are dullDiscolored, film Cannot be wiped offAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care Wash cabinetDoor and the door seal ExteriorTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Page Alterations reserved/1906