Miele G 2420 G 2430 operating instructions Default setting

Page 35

Additional functions

Default setting

All settings can be reset to the factory default.

^Turn the dishwasher off "s".

^Press the "Start/Stop" button and at the same time turn the dishwasher on s. Hold the "Start/Stop" button at least 4 seconds until the "Start/Stop" indicator comes on.

If it does not come on, start over.

^Press the "Delay Start" button 12 times.

The "Delay Start" indicator flashes once long and twice short in intervals. The time display shows p 0 or p 1.

The time display shows if a setting was changed.

–"p 1": All settings are factory default.

–"p 0": At least one setting was changed.

^To reset the dishwasher to the factory default, press the program button.

The setting is now saved.

^Turn the dishwasher off s.

35

Image 35

Contents Operating instructions Optima Series 2420 2430 Contents Contents Electrical Safety Important Safety InstructionsInstallation Disposal of an appliance UseGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Child Safety Lock Checking the water hardness Water softenerFilling the salt container Salt indicator Adding rinse aid Rinse aidAdjusting the dosage Rinse aid indicatorLoading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Cutlery tray Spoon inserts for the cutlery basket Cutlery basketCup racks Upper basketCoffee bar Inserting the insert b Removable spike insertRemoving the insert a Slide out the upper basket Adjusting the upper basketLower basket PlateGuard Plus with StemGuard Bottle holder Lower basket insertsInserting an insert b Foldable Spike insertRemoving an insert a Basket accessories Detergent UseAdding detergent Starting a program Turning onSelecting a program Usage Program When to use Program sequenceProgram guide At the end of a program Glasscare indicatorProgram sequence indicator Time displayChanging a program Interrupting a programGel Detergent settingsAdditional functions Starting a program before the delay start has elapsed Delay startDelay start display Default setting Technical faults Frequently asked questionsProblems water intake/drain General problems with the dishwasher Sounds Poor cleaning results Visible on cutlery Issue Possible fault Fix Dishes are not dryAre spotted White residue isCannot be wiped off Issue Possible fault Fix Glasses areDiscolored Film cannot be wiped Off Glasses are dull Discolored, filmMieleCare After sales servicePC Update RepairsTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealTriple filter system Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Page Alterations reserved/1906