Miele G 2420 G 2430 Cleaning the water inlet filter, Installing an in-line water filter

Page 50

Cleaning and Care

Cleaning the water inlet filter

A filter is incorporated into the intake hose attached to the dishwasher’s shut off valve. If your water is hard or the pipes contain sediment, this filter may clog and prevent enough water from entering the wash cabinet.

,The plastic housing of the water connection contains electrical wiring. Do not submerge the housing in liquid.

Do not cut the intake hose or submerge it in liquid.

Installing an in-line water filter

If your water contains a large number of insoluble substances, a filter between the water valve and the intake hose connection is recommended. These filters can be purchased from Miele.

Cleaning the filter

^Turn off the dishwasher and pull the plug.

^Turn off the water supply.

^Unscrew the intake hose.

^Carefully remove the rubber seal.

^Remove the filter using needle nose pliers and rinse it under running water.

^Reinsert the filter and seal. Make sure they are seated correctly.

^Screw the intake hose back on the water valve, checking that it is not cross-threaded.

^Slowly turn on the water supply and test for leaks.

50

Image 50

Contents Operating instructions Optima Series 2420 2430 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Child Safety Lock Water softener Checking the water hardnessFilling the salt container Salt indicator Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosageLoading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Cutlery tray Cutlery basket Spoon inserts for the cutlery basketCup racks Upper basketCoffee bar Inserting the insert b Removable spike insertRemoving the insert a Adjusting the upper basket Slide out the upper basketLower basket Lower basket inserts PlateGuard Plus with StemGuard Bottle holderInserting an insert b Foldable Spike insertRemoving an insert a Basket accessories Use DetergentAdding detergent Starting a program Turning onSelecting a program Usage Program When to use Program sequenceProgram guide Time display Glasscare indicatorProgram sequence indicator At the end of a programInterrupting a program Changing a programGel Detergent settingsAdditional functions Starting a program before the delay start has elapsed Delay startDelay start display Default setting Frequently asked questions Technical faultsProblems water intake/drain General problems with the dishwasher Sounds Poor cleaning results White residue is Issue Possible fault Fix Dishes are not dryAre spotted Visible on cutleryDiscolored, film Issue Possible fault Fix Glasses areDiscolored Film cannot be wiped Off Glasses are dull Cannot be wiped offRepairs After sales servicePC Update MieleCareTransport User Maintenance Instructions Door and the door seal Cleaning and CareWash cabinet ExteriorTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Page Alterations reserved/1906