Miele G 2420 G 2430 operating instructions Plumbing, Connection to the water supply

Page 56

Plumbing

Connection to the water supply

,Do not drink water from the dishwasher!

–The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot or cold water source. For lowest energy consumption connect the dishwasher to a cold water source. For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles.

–The inlet hose is approx. 5 ft. (1.5 m) long. A 5 ft (1.5 m) flexible metal hose (pressure resistant up to 2030 psi) is available.

–The water inlet hose comes equipped with a 3/4" female hose thread connector. This can be directly connected to a water supply with 3/4" MHT (male hose thread ends).

–Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar).

,Do not cut the intake hose. It contains electrical wiring. If the hose is cut, the dishwasher will not work. There will be a waterleak and you could be injured. If the hose is too long, coil it neatly and place it behind the machine.

56

Image 56

Contents Operating instructions Optima Series 2420 2430 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Child Safety Lock Water softener Checking the water hardnessFilling the salt container Salt indicator Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosageLoading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Cutlery tray Cutlery basket Spoon inserts for the cutlery basketCup racks Upper basketCoffee bar Inserting the insert b Removable spike insertRemoving the insert a Adjusting the upper basket Slide out the upper basketLower basket Lower basket inserts PlateGuard Plus with StemGuard Bottle holderInserting an insert b Foldable Spike insertRemoving an insert a Basket accessories Use DetergentAdding detergent Starting a program Turning onSelecting a program Usage Program When to use Program sequenceProgram guide Glasscare indicator Program sequence indicatorTime display At the end of a programInterrupting a program Changing a programGel Detergent settingsAdditional functions Starting a program before the delay start has elapsed Delay startDelay start display Default setting Frequently asked questions Technical faultsProblems water intake/drain General problems with the dishwasher Sounds Poor cleaning results Issue Possible fault Fix Dishes are not dry Are spottedWhite residue is Visible on cutleryIssue Possible fault Fix Glasses are Discolored Film cannot be wiped Off Glasses are dullDiscolored, film Cannot be wiped offAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care Wash cabinetDoor and the door seal ExteriorTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Page Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Page Alterations reserved/1906