Miele CVA 4066 installation instructions Temperature, Automatic rinsing

Page 27

Settings

Temperature

Five temperature settings are available for each coffee selection and three settings for hot water.

Not every coffee type allows high temperatures. Some types react so sensitively that the crema cannot be properly built.

Select "Settings ", and confirm with OK.

Settings

Temperature

Automatic rinsing

Tap < or > until "Temperature" is highlighted, confirm with OK.

Tap < or > until the beverage is highlighted in which you wish to set the temperature for. Confirm with OK.

Tap < or > until the desired temperature is highlighted.

Tap OK to save the setting.

Automatic rinsing

It is important to flush out any residual coffee from the lines when starting to use the machine for the day. If the automatic rinse function is activated and the machine is cold, the rinse cycle will begin automatically as soon as the machine is turned on. This will also pre-heat the lines with the hot water used during the rinse cycle. This is indicated by a message in the display. If a beverage has already been made, the machine will also automatically run a rinse cycle just before turning off.

The factory default setting for the automatic rinse function is On.

If you do not want the rinse water to collect in the drip tray, always place an empty cup or the small cleaning container underneath the main dispenser.

Select "Settings ", confirm with OK.

Settings

Automatic rinsing

Steam system

Tap < or > until "Automatic rinsing" is highlighted, confirm with OK.

Tap < or > to select "On" or "Off", confirm with OK.

It is recommended that you set this program option to "On" to ensure that the rinse cycle will not be forgotten.

27

Image 27

Contents

En US, CA Contents Contents Children Proper useTechnical safety Use Save These Instructions and Review Them Periodically Front view Guide to the coffee systemInterior view Included accessories Before the first use First steps to useTouch controls DisplayTurning off Preparing your appliance for an extended vacaionFilling the water tank Filling water, beans or ground coffeeFilling ground coffee Filling the bean containerPreparing drinks Turning onPre-warming cups Coffee and espresso prepared from coffee beans Adjusting main dispenser heightCoffee and espresso prepared from ground coffee Double portionInterrupting preparation Always pre-warm the cup with hot Beverages with milkPrepare beverages Interrupt preparationTo interrupt preparation, tap OK again Cappuccino, latte macchiato, hot milk, frothUser profile beverages After use Adjusting the coffee grinder Grinder should be adjustedTo adjust the grinder setting Settings Settings menuLanguage Clock format Setting the time of day Time of day DisplayTimer Switch on atSwitch off after Activate Switch off atPre-brewing Amount of coffeeAutomatic rinsing TemperatureSteam system Lighting Adjusting the brightnessInfo displaying No. of drinks Lighting Setting the switch-off timeOverriding the system lock System lockWater hardness Activating/Deactivating the System lockLevel 1 soft Level 2 moderately hard 4 7 gr/gal 4 7 d Level 3 hardLevel 4 very hard Water supply Tone optionsShowroom program Restoring factory default settingsAll settings Factory default settingsSetting the serving sizes Latte Macchiato Setting serving sizes via Settings Setting the serving size for hot waterSelecting a user profile User profilesSaving an entry Canceling an entryCreating a user profile Changing a user profileManually When switched onDeleting a user profile RevertCleaning and care Quick GuideRecommended frequency What needs to be done? Rinsing the system Cleaning the milk pipework Milk pipeworkRinsing the milk pipework Cleaning clogged milk pipework Cleaning and care Stainless-steel milk container Main dispenser Waste unit Water tankDrip tray cover Drip trayDishwasher Main dispenser connectorBean container Interior and doorBrew unit Please drop the cleaning tablet in the ground coffee funnel Cleaning the brew unitWipe any spills from descaling immediately ExteriorDescaling the appliance Descaling Light turns off suddenly Frequently asked questionsDisplay remains dark Possible fault Solution Unit suddenly turns off Possible fault SolutionFrequently asked questions Grinding sounds louder than usual Possible fault SolutionDoor cannot be closed Possible fault Solution Coffee/espresso is not hot enough Possible fault SolutionCoffee dispensing is interrupted Possible fault Solution Instead of coffee only water is dispensedDrip tray is empty but a message to empty it is displayed Machine makes loud noises during descaling Water is in the waste unit Possible fault SolutionCoffee water is in the waste unit Possible fault Solution Descaling process was started accidentlyFrequently asked questions Message Check water inlet appears Possible fault Solution You hear water gurgle or rushing Grind control slide will not moveStorage drawer cannot be pushed in properly Door is hard to open and closeFrequently asked questions Frequently asked questions MieleCare After sales serviceInstallation instructions Caring for the environment Disposal of packing materialDisposal of an old appliance Connection to the water supply PlumbingThis Appliance Must be Grounded Electrical connectionInstallation options InstallationInstallation Adjusting the door hinges Page Page Alteration rights reserved Nr 818 660

Related manuals

Manual 72 pages 31.82 Kb