Miele CVA 4066 installation instructions Installation

Page 72

Installation

Installation

Make sure power is not supplied to the appliance while installation or maintenance work is performed. Disconnect the power supply to the work area by unplugging the unit, tripping the circuit breaker or removing the fuse. The coffee system must be installed into cabinetry before being used.

This unit should only be used in room temperatures ranging between 59 °F and 140 °F. Do not use the appliance outside of this range of temperatures

To align the appliance door flush with the kitchen cabinetry, there must be a sealing strip around the installation recess; otherwise, a sealing strip must be put in place around the appliance.

If there is no sealing strip around the installation recess, stick the Miele sealing strip onto the appliance from the back before putting it into the recess. Sealing strips are available from Miele.

Unscrew the height adjustable feet on the underside of the machine about 1/16" (2 mm).

Push the appliance all the way back into the cabinet and center it. If necessary level the unit with the four height adjustable feet.

The feet can be turned out up to 3/8" (10 mm).

Plug the appliance into the electrical outlet.

72

Image 72

Contents

En US, CA Contents Contents Proper use ChildrenTechnical safety Use Save These Instructions and Review Them Periodically Guide to the coffee system Front viewInterior view Included accessories First steps to use Touch controlsDisplay Before the first usePreparing your appliance for an extended vacaion Turning offFilling water, beans or ground coffee Filling the water tankFilling the bean container Filling ground coffeePreparing drinks Turning onPre-warming cups Adjusting main dispenser height Coffee and espresso prepared from coffee beansCoffee and espresso prepared from ground coffee Double portionInterrupting preparation Beverages with milk Prepare beveragesInterrupt preparation Always pre-warm the cup with hotCappuccino, latte macchiato, hot milk, froth To interrupt preparation, tap OK againUser profile beverages After use Adjusting the coffee grinder Grinder should be adjustedTo adjust the grinder setting Settings Settings menuLanguage Setting the time of day Time of dayDisplay Clock formatTimer Switch on atSwitch off after Switch off at ActivateAmount of coffee Pre-brewingTemperature Automatic rinsingLighting Adjusting the brightness Steam systemLighting Setting the switch-off time Info displaying No. of drinksSystem lock Water hardnessActivating/Deactivating the System lock Overriding the system lockLevel 1 soft Level 2 moderately hard 4 7 gr/gal 4 7 d Level 3 hardLevel 4 very hard Tone options Water supplyRestoring factory default settings All settingsFactory default settings Showroom programSetting the serving sizes Latte Macchiato Setting the serving size for hot water Setting serving sizes via SettingsUser profiles Selecting a user profileCanceling an entry Creating a user profileChanging a user profile Saving an entryWhen switched on Deleting a user profileRevert ManuallyCleaning and care Quick GuideRecommended frequency What needs to be done? Rinsing the system Cleaning the milk pipework Milk pipeworkRinsing the milk pipework Cleaning clogged milk pipework Cleaning and care Stainless-steel milk container Main dispenser Water tank Waste unitDrip tray Drip tray coverMain dispenser connector Bean containerInterior and door DishwasherBrew unit Cleaning the brew unit Please drop the cleaning tablet in the ground coffee funnelExterior Wipe any spills from descaling immediatelyDescaling the appliance Descaling Frequently asked questions Display remains dark Possible fault SolutionUnit suddenly turns off Possible fault Solution Light turns off suddenlyFrequently asked questions Possible fault Solution Grinding sounds louder than usualCoffee/espresso is not hot enough Possible fault Solution Door cannot be closed Possible fault SolutionCoffee dispensing is interrupted Possible fault Solution Instead of coffee only water is dispensedDrip tray is empty but a message to empty it is displayed Water is in the waste unit Possible fault Solution Coffee water is in the waste unit Possible fault SolutionDescaling process was started accidently Machine makes loud noises during descalingFrequently asked questions Message Check water inlet appears Possible fault Solution Grind control slide will not move Storage drawer cannot be pushed in properlyDoor is hard to open and close You hear water gurgle or rushingFrequently asked questions Frequently asked questions After sales service MieleCareInstallation instructions Caring for the environment Disposal of packing material Disposal of an old appliance Plumbing Connection to the water supplyElectrical connection This Appliance Must be GroundedInstallation Installation optionsInstallation Adjusting the door hinges Page Page Alteration rights reserved Nr 818 660

Related manuals

Manual 72 pages 31.82 Kb