Settings
Showroom program
The showroom program is used to demonstrate the machine at exhibits. In this demo mode, the machine lighting is On, but the machine does not heat up.
Restoring factory default settings
The "Factory default" setting can be used to reset different settings back to their original default status.
You can select whether to reset all settings or delete any user profiles.
Select "Settings ", confirm with OK.
Settings
Factory default
Back
Tap < or > until "Factory default" is highlighted, confirm with OK.
Two options are now available:
User profiles
Selecting "User profiles" deletes all user profiles that you have entered, leaving only the default (standard) profile.
Under "User profiles", select "Reset", confirm with OK.
The user profiles are deleted.
All settings
Selecting "All settings" restores all settings back to the factory default.
Under "All settings", select "Reset", confirm with OK.
All settings are now reset to the default.
Factory default settings
–Amount of coffee (medium)
–Temperatures for coffee beverages and hot water (medium for both)
–
–Automatic rinse and steam system (both On)
–Showroom program (Off)
–Time display (On for 60 seconds), Time format (24 h),
Timer - Switch on at (12:00), Timer - Switch off after (1:00), Timer - Switch off at (12:00), ("Switch on at" and "Switch off at" both deactivated)
–Coffee jug (3 cups)
–Lighting: Brightness (medium)
–Safety: System lock (Off)
–Water hardness (very hard 4)
–Display: Contrast (medium), Brightness (maximum)
–Volume: Buzzer tones and keypad tone (both at maximum setting)
–User profile: Revert (when machine is turned on)
–Plumbed water supply (On)
If "Reset" is selected by accident, turn the machine off before pressing OK, the settings will not be reset.
33