Cleaning and care
Main dispenser
Pull the main dispenser all the way down and pull the cover forward to remove .
Turn the cover around, slide the insert upward and out, and clean both parts thoroughly.
Slide the insert back into the cover until it clicks into place.
Pull the nozzles of the main dispenser out.
Pull both rubber stoppers out and clean the stoppers and nozzles thoroughly.
Pull the air intake pipe out if necessary. You can knead or blow through the pipe to remove any potential blockages.
Never use a sharp object to remove blockages, this could damage the parts.
Put the rubber stoppers back into place.
After cleaning the nozzles of the main dispenser, slide them back into the machine firmly upward to ensure they are securely in place.
Replace the cover and slide the main dispenser up.
46